Onkyo Guide to Firmware Update: Complete Methods & Troubleshooting Error Codes

Page 80

Firmware Update

To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before proceeding with the update, please read the corresponding explanations carefully.

Update via network

You need a wired Internet connection to update the firmware.

Update via USB storage (page 81)

Please prepare a USB storage device such as a USB flash memory stick. You need at least 32 MB of available space to update the firmware.

Note

Check the network connection before updating.

Do not touch the any cable or device connected to the AV receiver during the update process.

Do not attempt to access the AV receiver from your PC while it is being updated.

Do not shutdown the power of the AV receiver while it is being updated.

The storage media in the USB card reader may not work.

If the USB device is partitioned, each section will be treated as an independent device.

If the USB device contains a lot of data, the AV receiver may take a while to read it.

Operation is not guaranteed for all USB devices, which includes the ability to power them.

Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a USB device with the AV receiver. Onkyo recommends that you back up your important music files beforehand.

If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it.

USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via a USB hub.

USB devices with security functions are not supported.

Limitation of liability

The program and accompanying online documentation are furnished to you for use at your own risk. Onkyo will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will Onkyo be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.

See the Onkyo web site for latest information.

En

Updating the Firmware via Network

The AV receiver allows you to update the firmware using network connection on the rear panel.

Note

Make sure your AV receiver and TV are turned on and an Ethernet cable is connected to the rear panel of the AV receiver.

Never unplug or turn off the AV receiver while it is being updated.

Never plug or unplug an HDMI or Ethernet cable during the update process.

Do not attempt to access the AV receiver from your PC while it is being updated.

Never unplug the power cord during the update process.

It takes maximum 60 minutes to complete the firmware update.

The AV receiver will retain all your settings after the update is finished.

Before you start

Set the “HDMI Control(RIHD)” setting to “Off” (page 58).

Turn off the controller device connected via Ethernet cable.

Turn off Zone 2.

Stop playback of contents from Internet Radio, iPod/iPhone, USB or servers, etc.

Update procedure

1

Press RECEIVER followed by SETUP on the

 

remote controller.

 

The Setup menu will be displayed on the TV screen.

 

The procedures thereafter can also be performed on

 

the AV receiver by using its SETUP, arrow and

 

ENTER buttons.

2

Select “Hardware Setup” and press ENTER.

3

Select “Firmware Update” and press ENTER.

 

Note that the “Firmware Update” option will be

 

grayed out for a short while after the AV receiver is

 

turned on. Please wait until it becomes operable.

4

Select “via NET” and press ENTER.

5

Select “Update” and press ENTER.

 

The update process will begin.

 

During the update process, the on-screen display

 

may disappear depending on the updated program.

 

When this occurs, you can still view the update

 

progress on the front display of the AV receiver. The

 

on-screen display will reappear after the update is

 

complete, and upon turning the AV receiver off and

 

on again.

6

The message “Completed!” appears on the front

 

display of the AV receiver, indicating that the

update has been completed.

80

Image 80
Contents TX-NR709 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features Services available may vary depending on the regionAmplifier ProcessingTHX Select2 Plus Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesZone 2 Line OUT jacks Rear PanelFront L/R, CENTER, Surr L/R, SB/FH/FW* L/R, Subwoofer Remote Controller Controlling the AV ReceiverDimmer button Display button Muting button Controlling the tunerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Number SpeakersUsing Dipole Speakers Using a Powered SubwooferBi-amping the Front Speakers TipConnecting a Power Amplifier Connecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Components Assignable Connecting Components with HdmiAudio Return Channel ARC function Connecting Your Components E F G HHow to record a video source Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordPlug the power cord into an AC wall outlet Taiwan modelsTurning On/Off the AV Receiver Turning OnTurning Off AV receiver comes on, the display lightsSelecting the Language for the Onscreen Setup Menus Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentEnter Understanding Icons on the DisplayPlaying an iPod/iPhone via USB Playing a USB Device Listening to Internet RadioTop menu of Internet Radio Listening to Other Internet RadioRegistering My Favorites*1 Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioMode Presetting AM/FM StationsUsing RDS excluding North American and Taiwan models Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure First measurement positionWhen you’ve finished making the settings, press Adjust the subwoofer volume level to 75 dB` Cancel Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceZXC Onkyo-Original DSP Listening ModesListening Modes DTS DSD*6THX Listening Mode Description Input Speaker Source Layout Neo6Audyssey DSX *8 Listening Mode Description Input Speaker Source Layout Used. The Neo6 indicator lights on the displayFor 7.1-channel playback Sources for 6.1/7.1-channel playbackSetting the Display Brightness Using the Home MenuUsing the Sleep Timer Using Headphones Displaying Source InformationChanging the Input Display Selecting Speaker LayoutUsing Easy Macros RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory NotesInput/Output Assign Monitor OutSUB Hdmi OUT SUBHere are the default assignments Hdmi InputComponent Video Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PortSpeaker Setup Speaker SettingsDigital Audio Input Analog Audio InputSubwoofer Phase FrontCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Wireless Subwoofer Speaker DistanceLevel Calibration UnitBGC Equalizer SettingsTHX Audio Setup Dolby Audio AdjustMultiplex/Mono LFE Level Theater-DimensionalAudyssey DSX Source Setup AudysseyName Edit IntelliVolumeSync Picture Adjust To correct a characterWide Mode*1*2 Picture Mode*1Audio Selector Listening Mode Preset Charge ModeHardware Setup Volume SetupOSD Setup MiscellaneousTuner AM/FM Frequency Step North American and Taiwan modelsAM Frequency Step European, Australian and Asian models Hdmi ControlRIHDAuto Standby Audio TV OutAudio Return Channel Lip SyncDhcp Firmware UpdateNetwork Using the Audio Settings Remote Controller SetupLock Setup Re-EQ Audyssey Music OptimizerLate Night Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierZone Making Zone 2 ConnectionsControlling Zone 2 Components Adjusting the Volume for ZoneOperating on the remote controller Using a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetMuting Zone Press ZONE2 followed by MutingUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Controlling Your iPod/iPhone RI DockAvailable buttons Repeat Random DisplayMenu ModePreprogrammed Remote Control Codes Looking up for Remote Control CodeEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsEnter Setup Search Repeat Random Mode VCR/PVR8SOURCE*1 Input Guide TOP MenuLearning Commands Deleting Acquired CommandsFollowing buttons cannot learn new commands RemoteUsing Normal Macros Making MacrosRunning Macros Deleting MacrosAudio TroubleshootingPower There’s no sound with a certain signal format Can’t select the Pure Audio listening modeSpeaker volume cannot be set as required About DTS signalsTuner Remote ControllerVideo UP-A1 Dock for iPod/iPhone RecordingZone Music Server and Internet RadioUSB Device Playback OthersImportant Note Regarding Video Playback Component Video Monitor OUTFirmware Update Update procedureUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkError Code Description Updating the Firmware via USBErrors during an update via USB Onkyo Sound & Vision CorporationConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats OUTVideo Resolution Chart Output4K *2 1080p/24 1080i 720p 480p/576p 480i/576i 1080p 1080i 720p 480p/576p 480i/576iOperations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerAbout Copyright Protection About HdmiSupported Audio Formats Network Requirements Network/USB FeaturesConnecting to the Network Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaSpecifications Amplifier Section Tuner SectionVideo Section GeneralAudio Outputs OthersMemo Memo 4 0 0 6 9
Related manuals
Manual 96 pages 27.47 Kb

TX-NR709 specifications

The Onkyo TX-NR709 is a high-performance home theater receiver that has garnered attention for its impressive audio capabilities and connectivity options. Designed for audiophiles and home cinema enthusiasts, this model combines advanced technologies and a plethora of features to ensure an immersive viewing and listening experience.

One of the standout characteristics of the TX-NR709 is its capacity to handle multiple audio formats. It supports the latest Dolby TrueHD and DTS-HD Master Audio, allowing for lossless audio playback that captures the nuances of your favorite films and music. With an impressive 7.2 channel configuration, the receiver provides rich and dynamic sound, making it suitable for both standard and expansive home theater setups.

Equipped with Onkyo’s proprietary WRAT (Wide Range Amplification Technology), the TX-NR709 delivers high-quality sound reproduction while minimizing distortion. This technology ensures clarity in sound across all volume levels, making it ideal for both quiet evenings and epic movie nights. The receiver also features a 100 watts per channel output, providing ample power for even the most demanding speakers.

For those who prioritize connectivity, the TX-NR709 does not disappoint. It boasts a comprehensive array of inputs, including six HDMI ports, ensuring compatibility with various devices such as gaming consoles, Blu-ray players, and set-top boxes. This model supports 3D video and 4K upscaling, enabling users to enjoy their content in stunning high definition.

Additionally, the receiver features built-in support for streaming services, allowing users to access music from various platforms effortlessly. With technologies like DLNA and AirPlay compatibility, streaming from smartphones, tablets, or computers is seamless. Users can also take advantage of the receiver's network capabilities to listen to internet radio stations and access their digital music libraries.

Setting up the TX-NR709 is made easy with the inclusion of Audyssey MultEQ technology, which automatically calibrates the receiver's output to match the acoustics of your room. This ensures optimal sound quality tailored to your specific environment.

Overall, the Onkyo TX-NR709 is a versatile and powerful choice for home theater enthusiasts. Its combination of cutting-edge audio technologies, abundant connectivity options, and user-friendly setup features make it a standout receiver in the competitive home audio market. Whether for movies, music, or gaming, the TX-NR709 aims to deliver a captivating audio experience that elevates any entertainment session.