IMPORTANT SAFETY INSTRUCTIONS
(Continued from previous page)
B. Reduced Air Flow
Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. To ventilate the system nor- mally and avoid overheating, leave at least 1 inch (2.5 cm) on each side (including top and bottom) of the PCS150R. Do NOT stack other equipment on the top of the PCS150R.
C. Circuit Overloading
Consideration should be given to the con- nection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.
D. Reliable Earthing
Maintain reliable earthing of
E.Mains Outlet Earthing
The apparatus with Class I construction must be connected to a mains socket outlet with a protective earthing connection.
PCS150R Installation on a Flat Surface
To install the PCS150R on a level surface (table top, shelf, etc.):
•Install the equipment in an environment com- patible with the maximum operating ambient temperature (Tma) specified by the manufac- turer (see Specifications information in this document).
•Place spacers or rubber feet (not provided) on the bottom of the PCS150R.
•Carefully place the PCS150R on the level surface.
•To ventilate the system normally and avoid overheating, leave at least 1 inch (2.5 cm) on each side (including top and bottom) of the PCS150R. Do NOT stack other equipment on the top of the PCS150R.
5 |