LG Electronics PCS150R View System Information, Main Menu System information Info Video

PCS150R Configuration Options (Cont.)

Example: PCS150R Main Menu

---------
Main Menu
---------	System information
info
video	Configure video parameters
setip	Setup TCP/IP
tz	Timezone setup
pwd	Change password
update	Update
updser	Update via serial link
vpn	VPN setup
reset	Reset board
exit	End the session
Command >

Note: You can always press Enter at the Command > prompt to display the Main Menu.

View System Information

1.Log in to the PCS150R as described on the previous page.

2.At the Command > prompt, type info and press Enter.

The System Information display identifies important information about the PCS150R, including the unit serial number, hardware ID (firmware version), software versions, MAC addresses, and IP addresses, for example:

PCS150R Pro:Centric Server v4.5

SN: 001-12410005

Hardware ID: 1.1.0.1

OS version: Linux 2.6.38-zenith+

OS release: #204 Mon May 2 17:21:54 CDT 2011

Eth0 MAC: 00:0C:63:3B:00:55

Eth0 IP: 192.168.10.77

Eth1 MAC: 00:0C:63:3B:00:65

Eth1 IP: n/a

VPN IP: 10.7.0.1

RF config: Mode 3, QAM-B, RF: 6 MHz, 5.36 MSps, ASI: 38.81 Mbps

RF channel: 69 *

Local time: Wed May 18 16:08:12 CDT 2011

It is recommended that you record this information for future reference. If you find it necessary to call customer service or engineering support, please have this information available.

*This field only appears if RF output is configured for QAM-B modulation. If RF output is configured for DVB-C modulation, the display will identify the RF frequency (in KHz).

14 206-4157