LG Electronics W2220P manual Setup

On Screen Display(OSD) Selection and Adjustment

Main menu

SETUP

D-SUB input

HDMI input

MENU : Exit

: Adjust

: Adjust

SET : Select another

sub-menu

Sub menu Description

LANGUAGE	To choose the language in which the control
	names are displayed.
OSD	To adjust position of the OSD window on the
POSITION	screen.
WHITE	If the output of the video card is different the
BALANCE	required specifications, the color level may
	deteriorate due to video signal distortion. Using
	this function, the signal level is adjusted to fit into
	the standard output level of the video card in
	order to provide the optimal image.
	Activate this function when white and black colors
	are present in the screen. (Only for D-SUB input)
OVERSCAN	Removes noise that may occur at the edges of an
	image when HDMI is connected to an external
	device. When ON is selected, the image size is
	reduced to prevent noise. When OFF is selected,
	the original image size is maintained regardless of
	noise. (Only for HDMI input)
POWER	Use this function to set the power indicator on the
INDICATOR	front side of the monitor to ON or OFF.
	If you set OFF, it will go off.
	If you set ON at any time, the power indicator will
	automatically be turned on.
4:3 IN WIDE	Adjusts the aspect ratio between wide screen (full
	screen) and 4:3 screen.
	• WIDE : Switch to full screen mode according to
		input image signal.
	• 4:3 : Change the input image signal ratio to 4:3.
		WIDE	4:3
FACTORY	Restore all factory default settings except
RESET	"LANGUAGE." Press the , buttons to
	reset immediately.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the white balance function again. This function will be enabled only when the input is a D-SUB input.

21