LG Electronics D4470 user manual Installing Additional RAM Memory, Dual In-line Memory Module

3–4

Installing Hardware Accessories

Installing Additional RAM Memory

	The D4–470 comes equipped with 128MB of RAM. You do not need to add RAM
	memory if 128MB of RAM is sufficient for your application.
	The three 168–pin DIMM (Dual In–line Memory Module) sockets on the D4–470
	support PC100–compliant SDRAMs. The sockets can be filled in any combination of
	DIMMs of any size up to 768 MB of memory.
Installing the	Prior to installing the DIMMs, first make sure the two handles of the DIMM socket are
Memory	in the open position (i.e. the handles lean outward). Slide the DIMM slowly along the
	plastic guides on both ends of the socket. Then press the DIMM module straight
	down into the socket until you hear a click. Note that the two DIMM socket handles
	have automatically locked the memory module in place.
	To remove the memory module, gently push the two handles outward
	simultaneously. This will eject the memory from the DIMM socket.
	Dual In–line Memory Module

DIMM Socket
Handles	DIMM Sockets

NOTE: It is not necessary to remove the CPU–board to install additional DIMMs.