Mitsubishi Electronics WL6700LU, WL6700U user manual EN-26

Menu operation (continued)

3. FEATURE menu

	opt.
FEATURE
	ASPECT	AUTO (FULL)
	PASSWORD	DISPLAY
	FUNCTION	INPUT
	MENU POSITION	1.
	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO
	SETUP	AUTO
	SCART INPUT	OFF
A Ë	LANGUAGE	English
	RESET ALL	OK

ITEM	SETTING	FUNCTION
ASPECT	AUTO (FULL)	Input video signal is displayed at the max height (800 pixels) or max width
		(1366 pixels) of the panel while its aspect ratio is maintained.
	AUTO (16:10)	Select this setting when using a 16:10 screen.
	AUTO (16:9)	Select this setting when using a 16:9 screen.
	AUTO (4:3)	Select this setting when using a 4:3 screen.
	16:9	Regardless of the type of input signal, image is displayed at 16:9 aspect
		ratio (1366 x 768 pixels). Select this setting when inputting squeeze signal.
	REAL	Input video signal is displayed at its original pixel size.
	FULL	Regardless of the type of input signal, image is displayed at the full panel
		size (1366 x 800 pixels).
PASSWORD FUNCTION		Use to enable or cancel the password lock. See page 34 for details.
MENU POSITION	2 options	Use to change the position of the menu.
CINEMA MODE	AUTO	The film mode will be automatically activated when a film source signal is
		input.
		Select AUTO for normal use.
		When flicker occurs on the screen, frame dropping or other incorrect
		display occurs, or jaggies on slanting lines are remarkable, select either
		FILM or VIDEO, which improves the symptom better.
	FILM	Fixed to the film mode.
	VIDEO	The film mode will not be activated.
VIDEO SIGNAL	8 options	When AUTO is selected, the appropriate video format is automatically
		selected depending on the input signal. If the image isn’t displayed
		correctly, select the desired video format manually.
SETUP	AUTO	Select to change the SETUP mode automatically.
	OFF	Select to make black lighter.
	3.75% / 7.5%	Select to make black thicker.

•When 7.5% is chosen, the brightness is decreased by the set-up can- cel function for the U.S. Choose OFF when the image is dark.

SCART INPUT	ON / OFF	Choose ON when connecting the projector with a device equipped with
		the SCART terminal that can output RGB signal. SCART terminal is used
		mainly in Europe. Choose OFF normally. (Available only for the input signal
		from the COMPUTER/COMPONENT VIDEO IN 2 terminal.)
LANGUAGE	12 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding IMAGE CAPTURE,
		PASSWORD FUNCTION and LANGUAGE) to the factory setting values.

•CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

EN-26