Mitsubishi Electronics WD510U-G user manual Others, Maintenance, Cleaning of the lens

Page 30

Troubleshooting (continued)

Others

 

Problem

Solution

 

 

The exhaust vents emit warm air.

• This air comes out after cooling the inside of the projector. You may feel hot, but this is not a malfunction.

 

 

No audio is output.

• Check that the volume isn’t set to low.

 

 

 

 

 

• The microcomputers inside the projector may be wrongly operating because of noise.

The menu can’t be used.

J Press the POWER button to turn off the lamp and unplug the power cord from the wall outlet. Wait about

 

 

10 minutes, plug the power cord in, and try again.

 

 

 

 

 

• This indication appears when the ambient temperature rises high. When the ambient temperature stays high,

 

 

the lamp goes out.

"TEMPERATURE!!" is displayed.

J Eliminate any causes of the rise in the ambient temperature.

• This indication appears when the air inlet or outlet grille is blocked. When they are kept blocked, the lamp

 

 

 

 

goes out.

 

 

J Remove the objects blocking the air inlet or outlet grille.

 

 

 

The

mark appears.

• This mark appears when ineffective operation is carried out. This isn’t a product malfunction.

 

 

 

 

 

• Check that the batteries are loaded in the remote control or the batteries are not weak. (See page 8.)

The remote control doesn’t function easily or at all.

• Check that the remote control sensor isn’t exposed to direct sunlight or fluorescent light. (See page 8.)

• Use the remote control within its operation range. (See page 8.)

 

 

 

 

• Use the remote control at least 10 cm away from the projector.

 

 

 

 

 

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to enable the password

The buttons on the control panel (except for the

lock.

POWER button) don’t function.

J Cancel the password lock or contact the person in charge of management of the projector.

 

 

(See page 25.)

 

 

 

Abnormal sound is heard.

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare occasions. Such symp-

tom is not a malfunction.

 

 

 

 

 

If the following problem occurs after the lamp is replaced, check the following first.

Problem

 

Solution

 

 

The projector does not turn on.

• Fit the lamp cover securely. (See page 27.)

•

Reset the lamp operating time. (See page 27.)

 

 

 

 

The STATUS indicator blinks.

•

Reset the lamp operating time. (See page 27.)

 

 

 

Maintenance

Warning:

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating.

Caution:

Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector.

Cleaning of the projector and the ventilation slots

Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild detergent, and then wipe them with a dry cloth.

To protect the surface of the projector from fading or deteriorating:

•Do not spray insecticide on or inside the projector.

•Do not use benzin or thinner to clean it.

•Do not let rubber or plastic materials contact with projector.

Cleaning of the lens

Use a standard lens-cleaning brush or a piece of lens tissue dampened with lens cleaning fluid. The lens surface is fragile. Use only recommended, nonabrasive lens-cleaning materials. Do not touch the lens with your fingers.

EN-30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents WD510U/WD510U-G When using the projector in Europe only for WD510U ShockContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Place of installationTerminal board OverviewControl panel 12 6Remote control OverviewBottom side Remote control Battery installationOperation range of the remote control When the aspect ratio of the image is 1610 Wxga InstallationWhen the aspect ratio of the screen is Layout of the projectorFront projection, ceiling mounting InstallationWhen the aspect ratio of the image is Rear projectionBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Basic connections Projector + ComputerUsing the adjustment feet rear Adjustment of the projection angleUsing the adjustment feet front PreparationStatus Power Power-onWhen fine streaks are seen on projected images Basic operationBasic operation When connecting to a laptop computer Wall ScreenAuto Menu operationContrast Theater UserMenu Options Menu operationBasic operation Image menuInstallation menu Feature menu Signal User menu Singal menuInformation menu Gamma mode Image adjustmentAdjusting projected images Color EnhancerBrilliantColorTM Image adjustmentSimple method to adjust the image position LPF Progressive filterAdvanced features FreezeTo use the Magnify mode Advanced featuresTo cancel the password function MagnifyLamp replacement When the projector is mounted to the ceilingLamp replacement Interval of lamp replacementReset of the lamp operation time Troubleshooting Power StatusNo image appears on the screen Troubleshooting Images are not displayed correctlyLPF Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots OthersIndicators Normal conditionAbnormal condition Specifications DVI-DSpecifications ConnectorsDimensional drawings unit mm VGA60 CGA84CGA85 VGA72Mitsubishi Electric Corporation
Related manuals
Manual 6 pages 16.6 Kb

WD510U-G specifications

The Mitsubishi Electronics WD510U-G is an advanced DLP (Digital Light Processing) projector that boasts impressive performance and cutting-edge technology tailored for a variety of applications. It is particularly well-suited for educational environments, corporate settings, and professional presentations, offering users an engaging visual experience.

One of the standout features of the WD510U-G is its high brightness capability, with a luminous output of up to 5,000 ANSI lumens. This capability ensures that images remain clear and vibrant even in well-lit environments, making it an ideal choice for larger rooms or venues where ambient light can often compromise visual quality.

The projector offers a native resolution of WXGA (1280 x 800), which is optimized for widescreen content, allowing users to display presentations, videos, and images with sharp detail and clarity. Additionally, the WD510U-G supports a range of resolutions, including HD, making it versatile enough to handle various content types.

Another hallmark of the WD510U-G is its exceptional contrast ratio of 3000:1, which enhances the depth and richness of images. This is particularly beneficial for presentations that rely on detailed graphics or video content, as it helps to ensure that dark areas remain distinct and colors appear vibrant.

Mitsubishi has also included a range of connectivity options in the WD510U-G, including HDMI, VGA, and USB ports, facilitating seamless integration with various input devices such as laptops, video players, and gaming consoles. This versatility allows users to quickly switch between different sources without the hassle of complex setups.

In terms of maintenance, the WD510U-G features a long-lasting lamp life of up to 5,000 hours in normal mode and up to 6,000 hours in eco mode. This extended lamp life reduces the need for frequent replacements, thereby lowering overall operating costs and ensuring consistent performance over time.

The projector is designed with user-friendly features, including an intuitive remote control and on-screen menus, which simplify the setup process and enhance user experience. Additionally, its compact and lightweight design makes it easy to transport, ideal for mobile professionals and educators.

In conclusion, the Mitsubishi Electronics WD510U-G is a powerful and reliable DLP projector that combines high brightness, excellent resolution, and versatile connectivity, making it a top choice for anyone seeking to deliver compelling presentations or display engaging content in a variety of settings. With its advanced technology and user-friendly features, it stands out as an essential tool for modern communication.
Top Page Image Contents