Use correct voltage | Mitsubishi Electronics WD510U-G manual

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your pro- jector. It may cause fire or electric shock. In this case, unplug immedi- ately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is operating.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. Wait for the fan to stop before unplugging the power cord.

Do not touch the air outlet grilles and bottom plate.

Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equip- ment. Also, do not put the projector on a desk that is easily affected by heat.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, caus- ing deterioration in the projector quality and fire.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector.

Flammable substances may ignite causing fire or breakdown because the temperature inside the projector rises very high while the lamp is illuminating.

Place of installation

For safety’s sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector to pre- vent the projector from being overheated.

•Do not install the projector at a place that is unstable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing the projector near any cable carrying a large amount of current.

•Place the projector on a solid, vibration-free surface. Otherwise it may fall, causing serious injury or damage.

•Do not stand the projector on its end. It may fall, causing serious injury or damage.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit, heater, or humidifier to avoid hot or moist air to the exhaust and ventilation hole of the projector.

Lamp replacement

Be sure to use the lamp attachment unit designed specifically for this projector when replacing the lamp with a new one. Lamp fragments may fall from the inside if the lamp were broken.

ENGLISH

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user’s authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN-5

WD510U-G specifications

The Mitsubishi Electronics WD510U-G is an advanced DLP (Digital Light Processing) projector that boasts impressive performance and cutting-edge technology tailored for a variety of applications. It is particularly well-suited for educational environments, corporate settings, and professional presentations, offering users an engaging visual experience.

One of the standout features of the WD510U-G is its high brightness capability, with a luminous output of up to 5,000 ANSI lumens. This capability ensures that images remain clear and vibrant even in well-lit environments, making it an ideal choice for larger rooms or venues where ambient light can often compromise visual quality.

The projector offers a native resolution of WXGA (1280 x 800), which is optimized for widescreen content, allowing users to display presentations, videos, and images with sharp detail and clarity. Additionally, the WD510U-G supports a range of resolutions, including HD, making it versatile enough to handle various content types.

Another hallmark of the WD510U-G is its exceptional contrast ratio of 3000:1, which enhances the depth and richness of images. This is particularly beneficial for presentations that rely on detailed graphics or video content, as it helps to ensure that dark areas remain distinct and colors appear vibrant.

Mitsubishi has also included a range of connectivity options in the WD510U-G, including HDMI, VGA, and USB ports, facilitating seamless integration with various input devices such as laptops, video players, and gaming consoles. This versatility allows users to quickly switch between different sources without the hassle of complex setups.

In terms of maintenance, the WD510U-G features a long-lasting lamp life of up to 5,000 hours in normal mode and up to 6,000 hours in eco mode. This extended lamp life reduces the need for frequent replacements, thereby lowering overall operating costs and ensuring consistent performance over time.

The projector is designed with user-friendly features, including an intuitive remote control and on-screen menus, which simplify the setup process and enhance user experience. Additionally, its compact and lightweight design makes it easy to transport, ideal for mobile professionals and educators.

In conclusion, the Mitsubishi Electronics WD510U-G is a powerful and reliable DLP projector that combines high brightness, excellent resolution, and versatile connectivity, making it a top choice for anyone seeking to deliver compelling presentations or display engaging content in a variety of settings. With its advanced technology and user-friendly features, it stands out as an essential tool for modern communication.