• When ID is specified (when the command is sent to the projector with the ID of “01” or “ALL”):
Command sent from the PC, etc. | Status code returned | Description | |
from the projector | |||
|
| ||
‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘76’ ‘49’ ‘0D’ |
| Command for checking the input | |
00;01;vI |
| terminal is sent to the projector with | |
|
| the ID of “01” or “ALL.” | |
| ‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘76’ ‘49’ | Check result (VIDEO) | |
| ‘76’ ‘31’ ‘0D’ | (The status is echoed back from the | |
| 00;01;vIv1 | projector with the ID of “01” or “ALL.”) |
4.3Remote commands (Not executable in
The remote commands allow the computer to control the projector in the same way as by the remote control. (The CON- TROLLER ID cannot be set. And some operations cannot be controlled.) The remote commands have no data codes.
Button’s name on remote |
| Function | ||
control | Character |
| ASCII code | |
ZOOM/FOCUS | r0f | 72h | 30h | 66h |
LENS SHIFT | r47 | 72h | 34h | 37h |
GEOMETRY | r43 | 72h | 34h | 33h |
MAGNIFY | r02 | 72h | 30h | 32h |
PinP/SPLIT (PinP only) | r04 | 72h | 30h | 34h |
BLANK | ra6 | 72h | 61h | 36h |
| r53 | 72h | 35h | 33h |
| r2b | 72h | 32h | 62h |
| r4f | 72h | 34h | 66h |
| r59 | 72h | 35h | 39h |
MENU | r54 | 72h | 35h | 34h |
ENTER | r10 | 72h | 31h | 30h |
AUTO POSITION | r09 | 72h | 30h | 39h |
FREEZE | ra4 | 72h | 61h | 34h |
ASPECT | re2 | 72h | 65h | 32h |
CE | re7 | 72h | 65h | 37h |
TEST PATTERN | r50 | 72h | 35h | 30h |
SUPER RESOLUTION | r96 | 72h | 39h | 36h |
1 (numeric keypad) | r49 | 72h | 34h | 39h |
2 (numeric keypad) | r4a | 72h | 34h | 61h |
3 (numeric keypad) | r4b | 72h | 34h | 62h |
4 (numeric keypad) | r4c | 72h | 34h | 63h |
5 (numeric keypad) | r4d | 72h | 34h | 64h |
6 (numeric keypad) | r4e | 72h | 34h | 65h |
7 (numeric keypad) | r88 | 72h | 38h | 38h |
8 (numeric keypad) | r58 | 72h | 35h | 38h |
9 (numeric keypad) | r89 | 72h | 38h | 39h |
0 (numeric keypad) | r48 | 72h | 34h | 38h |
ALL | r5a | 72h | 35h | 61h |
[Example] When displaying the MENU selection bar. (Values enclosed in quotation marks are ASCII codes.):
• When ID is not specified:
Command sent from the PC, etc. | Status code returned | Description | |
from the projector | |||
|
| ||
‘30’ ‘30’ ‘72’ ‘35’ ‘34’ ‘0D’ |
| Command operating the same as | |
00r54 |
| the MENU button (ID command is | |
|
| omitted.) | |
| ‘30’ ‘30’ ‘72’ ‘35’ ‘34’ ‘0D’ | Command receipt confirmation (The | |
| 00r54 | statuses are echoed back as many | |
|
| as the number of the connected | |
|
| projectors.) |
• When ID is specified (when the command is sent to the projector with the ID of “01” or “ALL”):
Command sent from the PC, etc. | Status code returned | Description | |
from the projector | |||
|
| ||
‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘72’ ‘35’ ‘34’ ‘0D’ |
| Command operating the same as the | |
00;01;r54 |
| MENU button is sent to the projector | |
|
| with the ID of “01” or “ALL.” | |
| ‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘72’ ‘35’ ‘34’ ‘0D’ | Command receipt confirmation | |
| 00;01;r54 | (The status is echoed back from the | |
|
| projector with the ID of “01” or “ALL.”) |
8