Mitsubishi Electronics XD8100U Ksh, HORIZ. Curved ARC VERT. Curved ARC, Bright Uniformity, Ksrst

4.4Direct commands (Not executable in stand-by mode. Possible only to read during BLANK.)

The direct commands are used to numerically adjust the geometrical correction and bright uniformity correction.

When the computer sends the command without adding the setting value, the projector returns the received command with the current setting value added as a data code.

ITEM		Function	Data
	Character	ASCII code
KEYSTONE (vertical)	KS	4Bh 53h	±40
			With CURVED-adjustment : ±10
KEYSTONE (horizontal)	KSH	4Bh 53h 48H	±25
			With CURVED-adjustment : ±10

KEYSTONE reset

CORNERSTONE LOWER RIGHT (vertical)

CORNERSTONE LOWER RIGHT (horizontal)

CORNERSTONE LOWER LEFT (vertical)

CORNERSTONE LOWER LEFT (horizontal)

CORNERSTONE UPPER RIGHT (vertical)

CORNERSTONE UPPER RIGHT (horizontal)

CORNERSTONE UPPER LEFT (vertical)

CORNERSTONE UPPER LEFT (horizontal)

CORNERSTONE reset

HORIZ. CURVED ARC

VERT. CURVED ARC

HORIZ. CURVED ORIGIN (vertical)

HORIZ. CURVED ORIGIN (horizontal)

VERT. CURVED ORIGIN (vertical)

VERT. CURVED ORIGIN (horizontal)

CURVED reset

BRIGHT UNIFORMITY

CORRECTION (level)

BRIGHT UNIFORMITY CORRECTION (correcting position) (vertical)

BRIGHT UNIFORMITY CORRECTION (correcting position) (horizontal)

KSRST	4Bh 53h 52h 53h 54h
CNLRV	43h	4Eh 4Ch 52h 56h
CNLRH	43h	4Eh 4Ch 52h 48h
CNLLV	43h	4Eh 4Ch 52h 56h
CNLLH	43h	4Eh 4Ch 52h 48h
CNURV	43h	4Eh 55h 52h 56h
CNURH	43h	4Eh 55h 52h 48h
CNULV	43h	4Eh 55h 52h 56h
CNULH	43h	4Eh 55h 52h 48h
CKSRST	43h 4Bh 53h 52h 53h 54h
CVAH	43h	56h	41h	48h
CVAV	43h	56h	41h	56h
CVHOV	43h	56h	48h	4Fh 56h
CVHOH	43h	56h	48h	4Fh 48h
CVVOV	43h	56h	56h	4Fh 56h
CVVOH	43h	56h	56h	4Fh 48h
CVRST	43h	56h	52h	53h 54h
BUCL	42h	55h	43h	4Ch
BUCV	42h	55h	43h	56h
BUCH	42h	55h	43h	48h

±25

±25

±25

±25

±25

±25

±25

±25

±50

With KEYSTONE- or CORNERSTONE-adjustment

:±30

±50

With KEYSTONE- or CORNERSTONE-adjustment

:±30

±10

±10

±10

±10

50 to 100

(Changeable in five increments)

1 to 7

1 to 7

How to set the value

Use the character or ASCII code as shown below to set the value.

Character	+	-	0	1	2	3	4	5	6	7	8	9
ASCII code	‘2Bh’	‘2Dh’	‘30h’	‘31h’	‘32h’	‘33h’	‘34h’	‘35h’	‘36h’	‘37h’	‘38h’	‘39h’

4.5Function commands (Not executable in stand-by mode. When the mute commands are sent while the splash screen is being displayed, the splash screen is only canceled.)

The BLANK command is used for the BLANK setting of this projector with the 0 (HEX: 30h) and 1 (HEX: 31h).

ITEM			Function	Data
	Character		ASCII code
BLANK	MUTE	4Dh 55h 54h 45h		0 (OFF), 1 (ON)
PinP	PiP	50h	69h 50h	0 (OFF), 1 (ON)
MAGNIFY	MGNFY	4Dh 47h 4Eh 46h 59h		0 (OFF), 1 (ON)
FREEZE	FRZ	46h	52h 5Ah	0 (OFF), 1 (ON)
Function canceling	FNCOFF	46h	4Eh 43h 4Fh 46h 46h

9