Mitsubishi Electronics X500U Preparing the projector for operation, Getting ready for projection

Page 12

Preparing the projector for operation

Getting ready for projection

1.Connect the power cord provided to the projector.

2.Connect the power cord to the wall power outlet.

3.Remove the lens cap.

Warning:

Do not look directly into the lens when projector is “ON”.

The lens cap is for protecting the lens. If you leave the power on with the cap on, the cap may be warped. Please remove the lens cap when you turn the power on.

This projector is equipped with the power cords for both U.S. and Europe. Use the appropriate power cord for your country.

A three-pin grounding type power plug is used with the projector. Do not remove the grounding pin on the power plug. If you are unable to insert the plug into the outlet, contact your electrician to replace your A/C outlet.

The supplied power cord for U.S. is used for 120V only. Never connect to any outlet or power supply having a different voltage or frequency. If you connect to the power supply having a different voltage, please use the appropriate power cord.

Use 100-240V AC 50/60Hz correct voltage other- wise it may lead to fire or electric shock.

Do not place any objects on the power cord, and keep the projector away from heat sources to avoid dam- aging the power cord. A damaged power cord can cause fire or electric shock.

Do not modify or alter the power cord otherwise it may cause fire or electric shock.

Contact your dealer if the cord is damaged.

Caution:

Plug in firmly and unplug by holding the plug, not by pulling the cable out.

Do not plug in or out with wet hands. It may cause an electric shock.

Adjusting the angle of projection

For the best result, project onto a flat screen with a 90 degree angle to the floor. If necessary, tilt the projector by adjusting two foot adjustments on the bottom of the projector.

screen

Adjustment foot

 

1.Lift the projector to the appropriate angle.

2.Press the buttons by the projector’s adjustable front feet, this will allow the feet to slide out to the ap- proximate position.

3.Release the foot adjustment buttons to lock the feet in that position.

4.Rotate the projector feet for fine adjustment.

Foot adjustment buttons

Adjustment foot

After using the projector

5. Return the adjustable feet into the projector.

Important:

The image becomes trapezoid shape when the screen or project is not level. Use KEYSTONE button and + or - buttons on the remote control to adjust, however, the circumference of the image may not be focused.

Screen on a flat wall with a 90˚ angle to the floor.

Align projector to produce a full screen display as illustrated on page 9.

The distance from the projector to the screen must be compatible with screen size chart on page 9. Note the distance from the screen chart.

EN – 12

Image 12
Contents LCD English Français Deutsch Italiano EspañolWhen using the projector in Europe Compliance NoticeContents Important safeguards It can lead to fire or electric shock It can lead to fireIf you use incorrect voltage, it can lead to fire Heat, dust etc. may blow out of it and hurt your eyesFoot adjustment buttons Left/Right Terminal board Overview15 14 HUBAdjustment foot Left/Right About laser beamAir inlet cover Lamp cover Using the remote control Battery installationOperation area for wireless control system Using the wired remote controlInstallation Orientation of the projectorScreen Basic connections Projector + AV equipmentProjector + DVD player or Hdtv decoder For using Macintosh Projector + Personal computerFor computer with DVI terminal About DDC For DVI connectionAdjusting the angle of projection Preparing the projector for operationGetting ready for projection To operate projector power on Auto PositionButton Volume from the speaker Turning off the projectorAV mute Menu operation Basic operationInstallation FeatureImage User memory for signal setting English SignalPicture adjustment Adjusting the imageColor temperature Color matrixAdjustment from personal computer Advanced features for presentation ExpandPicture in Picture PinP StillMouse remote control Projector + computer with USB connectorProjector + computer with PS/2 connector OperationSetting Computers What you can do with HUBExample of Network System Connection with a computerLamp replacement Interval of the lamp replacementHow to reset the operation time meter Maintenance Cleaning the air-filterCleaning the projector and the ventilation slots Cleaning the lensTroubleshooting Indicators Normal conditionAbnormal condition Specifications Connectors Dimensional drawings mmReplacement part Option / Not included in the box What’s included in the boxCGA70 871D340B10 Control projector by using a personal computer Control command diagramInterface ConnectionOperation commands Volume commandsHow to set the grade Control sequenceRemote commands Reading command diagramMenu setting commands Example Display Menu selection bar. is for Ascii codeExample 1 Set the Auto Power on to on

X500U specifications

The Mitsubishi Electronics X500U is a cutting-edge projector designed to cater to a wide range of professional and educational environments. This compact device is renowned for its impressive image quality, advanced technologies, and versatile features that make it an ideal choice for presentations, lectures, and multimedia experiences.

One of the main features of the X500U is its high brightness capacity, capable of delivering up to 5000 lumens. This ensures that images remain vibrant and clear even in well-lit rooms, making it well-suited for various settings. The projector utilizes a full HD resolution of 1920 x 1080, providing crystal-clear images with stunning detail. This resolution is particularly beneficial for displaying intricate graphs, charts, and videos, providing a rich viewing experience for any audience.

The X500U incorporates advanced DLP (Digital Light Processing) technology, which enhances color accuracy and contrast. With a high dynamic contrast ratio, the projector produces deep blacks and bright whites, ensuring that every detail is captured, even in the darkest scenes. This technology minimizes the potential for color degradation over time, ensuring that the projector maintains its performance over extended usage.

Another significant feature is the X500U's connectivity options. It includes multiple HDMI ports, USB slots, and VGA inputs, allowing seamless integration with a variety of devices such as laptops, Blu-ray players, and mobile devices. This versatility ensures that users can easily switch between different input sources without hassle.

The projector also boasts a range of user-friendly features, such as a quick-start option, which allows users to begin presenting almost immediately. Furthermore, with its built-in speaker system, the X500U provides adequate audio output for smaller rooms, eliminating the need for external speakers in certain situations.

In terms of portability, the X500U is designed to be lightweight and compact. This means it can be easily transported between locations, making it an excellent choice for traveling professionals and educators.

Lastly, the X500U is equipped with an eco-friendly mode that extends lamp life significantly, often reaching up to 15,000 hours. This feature not only reduces maintenance costs but also minimizes environmental impact, aligning with modern sustainability goals.

In conclusion, the Mitsubishi Electronics X500U is a versatile and robust projector, packed with features that enhance the viewing experience while providing convenience and efficiency for users across various applications.