Mitsubishi Electronics X500U Turning off the projector, Volume from the speaker, AV mute

Page 14

To operate projector power ON (Continue)

Turning off the projector

9.Press the POWER button.

The message “POWER OFF? YES : PRESS AGAIN” appears on the screen.

•To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click, STILL and VOLUME + and - buttons.

10.Press the POWER button again.

The light source lamp will be turned off.

Pressing the POWER button second time will shut off the light source lamp, but the exhaust fan con- tinues to operate for 120 seconds to cool down the light source lamp and LCD panels. In this time, the lamp indicator will be turned off.

11.Turn off the main power switch. When turning off the main switch, the POWER indicator turns off.

•In cases where the main power switch is acciden- tally turned off when either the intake/exhaust fan or the power source lamp is in operation, allow the unit to cool down for 10 minutes with the power turned off. Repeat step 3 when turning on the power source lamp. If the lamp does not turn on immediately, repeat this step two or three times. Replace the lamp if it should still fail to turn on.

AUTO POSITION button

When the source is selected to COMPUTER and the image is not in the right place, follow as shown below.

1.Set screen to the brightest display as possible (e.g., full-screen display of the “Trash” window).

2.If the screen saver is running, turn off the screen saver.

3.Press the AUTO POSITION button.

•If the image is still not in the right place, adjust the image position by using the SIGNAL menu.

The volume from the speaker

Press the volume + or – button to change the volume from the speaker.

The volume control bar will appear on the screen.

AUDIO

15

•The volume control bar will disappear about 10 seconds after releasing the volume buttons.

•The volume buttons do not work when MENU selection bar or MENU is displayed.

•If the high level of audio signal, for example DVD is supplied into COMPUTER AUDIO IN terminal, the speaker out may be distorted.

AV mute

Image and audio are temporarily muted by pressing the MUTE button. To restore the image and audio to the normal mode, press the MUTE button again.

•The audio from the AUDIO OUT jack is also muted by pressing the MUTE button.

Caution:

•When you have finished using this equipment, wait 120 seconds for the exhaust fans to stop. Then turn off the main switch and unplug the power cable from the wall outlet, for safety purposes.

•After the lamp is turned off, the lamp cannot be switched on again for 60 seconds as a precaution- ary measure. It will take another 60 seconds before the lamp indicator goes off. If you wish to turn on the projector again, wait until the indicator is off then press the POWER button.

•The exhaust fan rotates faster when the tempera- ture around the projector rises.

•When the temperature around the projector becomes too high, the sign “TEMP!!” blinks red on the screen. If the temperature stays too high, the lamp will be shut off automatically .

EN – 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents LCD English Français Deutsch Italiano EspañolWhen using the projector in Europe Compliance NoticeContents Important safeguards If you use incorrect voltage, it can lead to fire It can lead to fire or electric shockIt can lead to fire Heat, dust etc. may blow out of it and hurt your eyes15 14 Foot adjustment buttons Left/Right Terminal boardOverview HUBAir inlet cover Lamp cover Adjustment foot Left/RightAbout laser beam Operation area for wireless control system Using the remote controlBattery installation Using the wired remote controlScreen InstallationOrientation of the projector Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV equipment For computer with DVI terminal For using MacintoshProjector + Personal computer About DDC For DVI connectionGetting ready for projection Adjusting the angle of projectionPreparing the projector for operation Button To operate projector power onAuto Position AV mute Volume from the speakerTurning off the projector Menu operation Basic operationImage InstallationFeature User memory for signal setting English SignalColor temperature Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Picture in Picture PinP Advanced features for presentationExpand StillProjector + computer with PS/2 connector Mouse remote controlProjector + computer with USB connector OperationExample of Network System Setting ComputersWhat you can do with HUB Connection with a computerHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Cleaning the projector and the ventilation slots MaintenanceCleaning the air-filter Cleaning the lensTroubleshooting Abnormal condition IndicatorsNormal condition Specifications Replacement part Option / Not included in the box ConnectorsDimensional drawings mm What’s included in the boxCGA70 871D340B10 Interface Control projector by using a personal computerControl command diagram ConnectionHow to set the grade Operation commandsVolume commands Control sequenceMenu setting commands Remote commandsReading command diagram Example Display Menu selection bar. is for Ascii codeExample 1 Set the Auto Power on to on

X500U specifications

The Mitsubishi Electronics X500U is a cutting-edge projector designed to cater to a wide range of professional and educational environments. This compact device is renowned for its impressive image quality, advanced technologies, and versatile features that make it an ideal choice for presentations, lectures, and multimedia experiences.

One of the main features of the X500U is its high brightness capacity, capable of delivering up to 5000 lumens. This ensures that images remain vibrant and clear even in well-lit rooms, making it well-suited for various settings. The projector utilizes a full HD resolution of 1920 x 1080, providing crystal-clear images with stunning detail. This resolution is particularly beneficial for displaying intricate graphs, charts, and videos, providing a rich viewing experience for any audience.

The X500U incorporates advanced DLP (Digital Light Processing) technology, which enhances color accuracy and contrast. With a high dynamic contrast ratio, the projector produces deep blacks and bright whites, ensuring that every detail is captured, even in the darkest scenes. This technology minimizes the potential for color degradation over time, ensuring that the projector maintains its performance over extended usage.

Another significant feature is the X500U's connectivity options. It includes multiple HDMI ports, USB slots, and VGA inputs, allowing seamless integration with a variety of devices such as laptops, Blu-ray players, and mobile devices. This versatility ensures that users can easily switch between different input sources without hassle.

The projector also boasts a range of user-friendly features, such as a quick-start option, which allows users to begin presenting almost immediately. Furthermore, with its built-in speaker system, the X500U provides adequate audio output for smaller rooms, eliminating the need for external speakers in certain situations.

In terms of portability, the X500U is designed to be lightweight and compact. This means it can be easily transported between locations, making it an excellent choice for traveling professionals and educators.

Lastly, the X500U is equipped with an eco-friendly mode that extends lamp life significantly, often reaching up to 15,000 hours. This feature not only reduces maintenance costs but also minimizes environmental impact, aligning with modern sustainability goals.

In conclusion, the Mitsubishi Electronics X500U is a versatile and robust projector, packed with features that enhance the viewing experience while providing convenience and efficiency for users across various applications.
Top Page Image Contents