Mitsubishi Electronics X500U user manual Important safeguards

Page 4

Important safeguards

Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector.

1.Read instructions

All the safety and operating instructions should be read before the appliance is operated.

2.Retain instructions

The safety and operating instructions should be retained for future reference.

3.Warnings

All warnings on the appliance and in the oper- ating instructions should be adhered to.

4.Instructions

All operating instructions must be followed.

5.Cleaning

Unplug this projector from the wall outlet be- fore cleaning it. Do not use liquid aerosol clean- ers. Use a damp soft cloth for cleaning.

6.Attachments and equipment

Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, elec- tric shock or other personal injury.

7.Water and moisture

Do not use this projector near water or in con- tact with water.

8.Accessories

Do not place this projector on an unstable cart, stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table recom- mended by the manufacturer or sold with the projector. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

9.Ventilation

Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the projector and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or bookcase. Ensure that there is adequate ventilation and that the manufacturer's instruc- tions have been adhered to.

10.Power sources

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your appliance dealer or local power company.

11.Power-cord protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular at- tention to cords at plugs, convenience receptacles, and points where they exit from the appliance. Do not put the power cord under a carpet.

12.Overloading

Do not overload wall outlets and extension cords as this can result in a fire or electric shock.

13.Objects and liquids

Never push objects of any kind through open- ings of this projector as they may touch danger- ous voltage points or short-out parts that could result in a fire or electric shock. Never spill liq- uid of any kind on the projector.

14.Servicing

Do not attempt to service this projector your- self. Refer all servicing to qualified service per- sonnel.

15.Damage requiring service

Unplug this projector from the wall outlet and refer servicing to qualified service personnel un- der the following conditions:

(a)If the power-supply cord or plug is dam- aged.

(b)If liquid has been spilled, or objects have fallen into the projector.

(c)If the projector does not operate normally after you follow the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require exten- sive work by a qualified technician to re- store the projector to its normal operation.

(d)If the projector has been exposed to rain or water.

(e)If the projector has been dropped or the cabinet has been damaged.

(f)If the projector exhibits a distinct change in performance - this indicates a need for service.

16.Replacement parts

When replacement parts are required, be sure that the service technician has used replacement parts specified by the manufacturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

17.Safety check

Upon completion of any service or repair to this projector, ask the service technician to perform safety checks determining that the projector is in a safe operating condition.

EN – 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents LCD English Français Deutsch Italiano EspañolWhen using the projector in Europe Compliance NoticeContents Important safeguards It can lead to fire or electric shock It can lead to fireIf you use incorrect voltage, it can lead to fire Heat, dust etc. may blow out of it and hurt your eyesFoot adjustment buttons Left/Right Terminal board Overview15 14 HUBAbout laser beam Adjustment foot Left/RightAir inlet cover Lamp cover Using the remote control Battery installationOperation area for wireless control system Using the wired remote controlOrientation of the projector InstallationScreen Projector + AV equipment Basic connectionsProjector + DVD player or Hdtv decoder For using Macintosh Projector + Personal computerFor computer with DVI terminal About DDC For DVI connectionPreparing the projector for operation Adjusting the angle of projectionGetting ready for projection Auto Position To operate projector power onButton Turning off the projector Volume from the speakerAV mute Menu operation Basic operationFeature InstallationImage User memory for signal setting English SignalPicture adjustment Adjusting the imageColor temperature Color matrixAdjustment from personal computer Advanced features for presentation ExpandPicture in Picture PinP StillMouse remote control Projector + computer with USB connectorProjector + computer with PS/2 connector OperationSetting Computers What you can do with HUBExample of Network System Connection with a computerInterval of the lamp replacement Lamp replacementHow to reset the operation time meter Maintenance Cleaning the air-filterCleaning the projector and the ventilation slots Cleaning the lensTroubleshooting Normal condition IndicatorsAbnormal condition Specifications Connectors Dimensional drawings mmReplacement part Option / Not included in the box What’s included in the boxCGA70 871D340B10 Control projector by using a personal computer Control command diagramInterface ConnectionOperation commands Volume commandsHow to set the grade Control sequenceRemote commands Reading command diagramMenu setting commands Example Display Menu selection bar. is for Ascii codeExample 1 Set the Auto Power on to on

X500U specifications

The Mitsubishi Electronics X500U is a cutting-edge projector designed to cater to a wide range of professional and educational environments. This compact device is renowned for its impressive image quality, advanced technologies, and versatile features that make it an ideal choice for presentations, lectures, and multimedia experiences.

One of the main features of the X500U is its high brightness capacity, capable of delivering up to 5000 lumens. This ensures that images remain vibrant and clear even in well-lit rooms, making it well-suited for various settings. The projector utilizes a full HD resolution of 1920 x 1080, providing crystal-clear images with stunning detail. This resolution is particularly beneficial for displaying intricate graphs, charts, and videos, providing a rich viewing experience for any audience.

The X500U incorporates advanced DLP (Digital Light Processing) technology, which enhances color accuracy and contrast. With a high dynamic contrast ratio, the projector produces deep blacks and bright whites, ensuring that every detail is captured, even in the darkest scenes. This technology minimizes the potential for color degradation over time, ensuring that the projector maintains its performance over extended usage.

Another significant feature is the X500U's connectivity options. It includes multiple HDMI ports, USB slots, and VGA inputs, allowing seamless integration with a variety of devices such as laptops, Blu-ray players, and mobile devices. This versatility ensures that users can easily switch between different input sources without hassle.

The projector also boasts a range of user-friendly features, such as a quick-start option, which allows users to begin presenting almost immediately. Furthermore, with its built-in speaker system, the X500U provides adequate audio output for smaller rooms, eliminating the need for external speakers in certain situations.

In terms of portability, the X500U is designed to be lightweight and compact. This means it can be easily transported between locations, making it an excellent choice for traveling professionals and educators.

Lastly, the X500U is equipped with an eco-friendly mode that extends lamp life significantly, often reaching up to 15,000 hours. This feature not only reduces maintenance costs but also minimizes environmental impact, aligning with modern sustainability goals.

In conclusion, the Mitsubishi Electronics X500U is a versatile and robust projector, packed with features that enhance the viewing experience while providing convenience and efficiency for users across various applications.
Top Page Image Contents