Mitsubishi Electronics X500U user manual Adjustment from personal computer

Page 19

Adjustment from personal computer

Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers. In this case, press the AUTO POSITION button. If the images are still not projected correctly, use the MENU display to adjust the projected im- ages.

Top part of image curves :

Change the setting of HOLD in SIGNAL menu. Select ON , press the ENTER button and adjust BEGIN or END for image which top part is the least curved.

Image does not move naturally :

Adjust VERT. SYNC. of the menu in SIGNAL - USER menu. Select AUTO for normal setting. curved. Select AUTO for normal setting.

ENGLISH

opt.

SIGNAL

XGA60

Do not change each menu setting in USER menu for normal setting.

 

A

MEMORY CALL

AUTO

 

U

 

 

 

 

 

 

 

 

 

 

HORIZ. POSITION

0

 

 

 

 

 

 

 

 

VERT. POSITION

0

 

 

 

 

 

 

 

 

FINE SYNC.

0

 

 

 

 

 

 

 

 

TRACKING

0

 

 

 

 

 

 

RRGGBB

COMPUTER INPUT

RGB

 

 

 

 

 

 

 

 

HOLD

AUTO

 

 

 

 

 

USER MEMORIZE DELETE DEFAULT

Image moved to right or left :

Adjust HORIZ. POSITION in SIGNAL menu. Press the % button to move the image to left. Press the $ button to move the image to right.

Image moved to up or down :

Adjust VERT. POSITION in SIGNAL menu. Press the % button to move the image to upward. Press the $ button to move the image to down.

Image flickers / Image is out of focus : Adjust FINE SYNC. in SIGNAL menu.

SIGNAL-USER

CLAMP POSITION

0

CLAMP WIDTH

0

HORIZ. PIXELS

0

VERT. LINES

0

VERT. SYNC.

AUTO

SHUTTER(U)

0

SHUTTER(L)

0

SHUTTER(LS)

0

SHUTTER(RS)

0

Wide strips appear :

Adjust CLAMP POSITION or CLAMP WIDTH of each menu in SIGNAL - USER menu.

Noise appears on right or left side of image : Adjust SHUTTER (LS), SHUTTER (RS) or HORIZ. PIXELS of the menu in SIGNAL - USER menu.

Noise appears on top or bottom part of image : Adjust SHUTTER (U), SHUTTER (L) or VERT. LINES of the menu in SIGNAL - USER menu.

Simple adjustment method

1.Select HORIZ. POSITION in SIGNAL menu.

2.Press the$ or % button to adjust the horizontal start position (the left side of image).

3.Select TRACKING in SIGNAL menu.

4.Press the$ or % button to adjust the horizontal end position (the right side of image).

5.Repeat steps 1 to 4 for fine adjustment.

6.Select VERT. POSITION in SIGNAL menu.

7.Press the$ or % button to adjust the vertical start position (the top end of image).

EN – 19

Image 19
Contents English Français Deutsch Italiano Español LCDCompliance Notice When using the projector in EuropeContents Important safeguards Heat, dust etc. may blow out of it and hurt your eyes It can lead to fire or electric shockIt can lead to fire If you use incorrect voltage, it can lead to fireHUB Foot adjustment buttons Left/Right Terminal boardOverview 15 14About laser beam Adjustment foot Left/RightAir inlet cover Lamp cover Using the wired remote control Using the remote controlBattery installation Operation area for wireless control systemOrientation of the projector InstallationScreen Projector + AV equipment Basic connectionsProjector + DVD player or Hdtv decoder About DDC For DVI connection For using MacintoshProjector + Personal computer For computer with DVI terminalPreparing the projector for operation Adjusting the angle of projectionGetting ready for projection Auto Position To operate projector power onButton Turning off the projector Volume from the speakerAV mute Basic operation Menu operationFeature InstallationImage English Signal User memory for signal settingColor matrix Picture adjustmentAdjusting the image Color temperatureAdjustment from personal computer Still Advanced features for presentationExpand Picture in Picture PinPOperation Mouse remote controlProjector + computer with USB connector Projector + computer with PS/2 connectorConnection with a computer Setting ComputersWhat you can do with HUB Example of Network SystemInterval of the lamp replacement Lamp replacementHow to reset the operation time meter Cleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation slotsTroubleshooting Normal condition IndicatorsAbnormal condition Specifications What’s included in the box ConnectorsDimensional drawings mm Replacement part Option / Not included in the boxCGA70 871D340B10 Connection Control projector by using a personal computerControl command diagram InterfaceControl sequence Operation commandsVolume commands How to set the gradeExample Display Menu selection bar. is for Ascii code Remote commandsReading command diagram Menu setting commandsExample 1 Set the Auto Power on to on

X500U specifications

The Mitsubishi Electronics X500U is a cutting-edge projector designed to cater to a wide range of professional and educational environments. This compact device is renowned for its impressive image quality, advanced technologies, and versatile features that make it an ideal choice for presentations, lectures, and multimedia experiences.

One of the main features of the X500U is its high brightness capacity, capable of delivering up to 5000 lumens. This ensures that images remain vibrant and clear even in well-lit rooms, making it well-suited for various settings. The projector utilizes a full HD resolution of 1920 x 1080, providing crystal-clear images with stunning detail. This resolution is particularly beneficial for displaying intricate graphs, charts, and videos, providing a rich viewing experience for any audience.

The X500U incorporates advanced DLP (Digital Light Processing) technology, which enhances color accuracy and contrast. With a high dynamic contrast ratio, the projector produces deep blacks and bright whites, ensuring that every detail is captured, even in the darkest scenes. This technology minimizes the potential for color degradation over time, ensuring that the projector maintains its performance over extended usage.

Another significant feature is the X500U's connectivity options. It includes multiple HDMI ports, USB slots, and VGA inputs, allowing seamless integration with a variety of devices such as laptops, Blu-ray players, and mobile devices. This versatility ensures that users can easily switch between different input sources without hassle.

The projector also boasts a range of user-friendly features, such as a quick-start option, which allows users to begin presenting almost immediately. Furthermore, with its built-in speaker system, the X500U provides adequate audio output for smaller rooms, eliminating the need for external speakers in certain situations.

In terms of portability, the X500U is designed to be lightweight and compact. This means it can be easily transported between locations, making it an excellent choice for traveling professionals and educators.

Lastly, the X500U is equipped with an eco-friendly mode that extends lamp life significantly, often reaching up to 15,000 hours. This feature not only reduces maintenance costs but also minimizes environmental impact, aligning with modern sustainability goals.

In conclusion, the Mitsubishi Electronics X500U is a versatile and robust projector, packed with features that enhance the viewing experience while providing convenience and efficiency for users across various applications.