Mitsubishi Electronics PK10 user manual Installation, Layout of the projector, Front projection

Page 15
EN-15

Installation

Layout of the projector

Image size varies depending on the distance between the screen and the projector.

Front projection

 

W

 

C

D

B

 

H

 

A

 

 

AUTO POSITION

COMPUTER

VIDEO

L

 

L : Between the screen and the front edge of the projector

A : Hight of the projected image under the horizontal line Optical offset:

B:A 27:13

C:D 41:59

 

 

Screen Distance

 

 

 

Diagonal size

Width : W

Height : H

 

L

inch

m

inch

m

inch

m

inch

m

12

0.31

9.6

0.24

7.2

0.18

15.4

0.4

20

0.51

16.0

0.41

12.0

0.31

26.0

0.66

30

0.76

24.0

0.61

18.0

0.46

39.0

0.99

40

1.02

32.0

0.81

24.0

0.61

53.0

1.35

50

1.27

40.0

1.02

30.0

0.76

66.1

1.67

60

1.52

48.0

1.22

36.0

0.91

78.7

2.0

The above figures are approximate and may be slightly different from the actual measurements.

Caution:

Do not place the projector on a carpet or any flammable materials. It may cause damage or fire.

Place the projector at least 10 cm (or 4 inches) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.

Do not use the projector in the following locations and manners, which may cause fire or electric shock. In a dusty or humid place.

In a sideways or upside-down position.

Near a heater.

In an oily, smoky, or damp place such as a kitchen.

In direct sunlight.

Where the temperature rises high, such as in a closed car.

Where the temperature is lower than +41°F (or +5°C) or higher than +95°F (or +35°C).

Important:

Do not apply force to the lens, because the lens may be damaged.

Image 15
Contents EN-1 LED Projector PocketEN-2 EN-3 EN-4 Compliance NoticeContents Important safeguards EN-7 Do not face the projection lens to the sun Do not keep using the damaged projectorDo not look into the lens when the projector is operating Never remove the cabinet Do not modify the projectorEN-9 Place of installationEN-10 OverviewEN-11 Power supplyEN-12 For battery removalFor the first time use For battery changeRemote Control Precautions Operating RangeEN-14 Installation Layout of the projectorFront projection Basic connections Projector + AV deviceEN-16 For computer with D-SUB Projector + DVD player or HdtvProjector + Computer For MacintoshEN-18 PreparationPreparation for projection Following casesEN-19 EN-20 Power-onBasic operation On the control panelEN-21 Power-offOn the remote control EN-23 Menu operationEN-24 ImageEN-25 FeatureImage adjustment Image adjustmentAdjustment of the image from the computer EN-27 Simple adjustment methodTroubleshooting Images aren’t projected on the screenEN-28 EN-29 Images aren’t projected correctlyRainbow blurprojected images EN-30EN-31 OthersEN-32 MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensEN-33 IndicatorsEN-34 Normal condition Battery onlyEN-35 SpecificationsDimensional drawings unit mm Kensington LockEN-36 EN-37 Optional accessoriesWhat’s included in the box Pin assignment of S-Video, Video and VGA terminalsEN-38 Signal mode Resolution H xEN-39 Specification of Hdtv signalsSignal mode KHzMitsubishi Projector Contact Information North AmericaEurope EN-41 AsiaEN-42 EN-43 OceaniaEN-44