Mitsubishi Electronics PK10 Image adjustment, Adjustment of the image from the computer

Image adjustment

Image adjustment

You can adjust the image using the IMAGE menu.

To control the white-to-black level of the image: Adjust CONTRAST in the IMAGE menu. Press the Xbutton to increase the contrast and the W button to reduce it.

To control the light level of the image:

Adjust BRIGHTNESS in the IMAGE menu. Press the X button to lighten the image and the W button to darken it.

To determine the intensity of the color:

Adjust COLOR in the IMAGE menu. Press the Xbutton to increase the amount of color in the image and the Wbutton to decrease it.

To adjust the red-green color balance of the image: Adjust TINT in the IMAGE menu. Press the X button to increase the amount of green in the image and the W button to increase the amount of red in the image.

To adjust the detail and clarity of the image:

Adjust SHARPNESS in the IMAGE menu. Press the X button to sharpen the image and the W button to soften the image.

EN-26

Adjustment of the image from the computer

This projector adjusts the format of the video signal supplied from the computer. However, sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isn’t projected correctly, press the AUTO button. If the image isn’t projected correctly yet, adjust the image from the computer using the menu.

To move the image horizontally:

Adjust HORIZ. POSITION in the SIGNAL menu. Press the X button to move the image to the left. Press the W button to move the image to the right.

To move the image vertically:

Adjust VERT. POSITION in the SIGNAL menu. Press the

Xbutton to move the image upward. Press the W button to move the image downward.

When the image flickers:

Adjust FINE SYNC. in the SIGNAL menu.