Problem | Cause and solution | |
No source found. | Turn on the power of the connected device, or check whether there is something wrong | |
with the connected device. | ||
| ||
| Check whether the external device outputs signals. (Check this especially when the | |
| external device is a notebook computer.) | |
| Check that the cable connected to the external device isn’t defective. | |
| Check that the projector is connected to the external device using the correct | |
| terminals. | |
| Check that the connected device is correctly selected as the input source. | |
| When an extension cord is being used, replace it with the supplied cable and check | |
| whether images are projected correctly. |
Images aren’t projected correctly.
Problem | Cause and solution | |
Projected images are shaking. | Check that the cable connected to the external device isn’t intermittent. | |
Projected images are displaced. | Connect the cable’s plug with the external device’s connector firmly. | |
| Some computers output | |
| menu. | |
Projected images are distorted. | Adjust the projector and the screen so that they are perpendicular to each other. | |
Projected images are dark. | Adjust BRIGHTNESS in the IMAGE menu. | |
| Adjust the focus. | |
Projected images are blurred. | Clean the lens. | |
Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. | ||
| ||
| Adjust the projector and the screen so that they are perpendicular to each other. | |
White dots are seen on projected | This symptom is normal for a DLP projector and is not a malfunction. (A very small | |
images. | ||
number of pixels may stay lit or out, but such sympton is not a malfunction. Pixels | ||
Black dots are seen on projected | ||
of 99.99% or more are effective.) | ||
images. | ||
|