Mitsubishi Electronics PK10 user manual Never remove the cabinet Do not modify the projector

Page 8

WARNING:

Unplug the power cord or remove the battery immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector, adaptor or battery. It may cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This product contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Only use the provided AC adaptor (02550-0112-00).

EN-8

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is operating.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord or remove the battery during operation.

It can lead to product failure, fire, electric shock or other troubles.

Do not touch the air outlet grilles and bottom plate. Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment. Also, do not put the projector on a desk that is easily affected by heat.

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and fire.

Don’t put upwards. Because of blocking exhausted hole.

Don’t drop.

Don’t throw it away.

Don’t project to person’s eyes.

Image 8
Contents LED Projector Pocket EN-1EN-2 EN-3 Compliance Notice EN-4Contents Important safeguards EN-7 Do not keep using the damaged projector Do not look into the lens when the projector is operatingNever remove the cabinet Do not modify the projector Do not face the projection lens to the sunPlace of installation EN-9Overview EN-10Power supply EN-11For battery removal EN-12For battery change For the first time useEN-14 Remote Control PrecautionsOperating Range Front projection InstallationLayout of the projector EN-16 Basic connectionsProjector + AV device Projector + DVD player or Hdtv Projector + ComputerFor Macintosh For computer with D-SUBPreparation Preparation for projectionFollowing cases EN-18EN-19 Power-on Basic operationOn the control panel EN-20Power-off EN-21On the remote control Menu operation EN-23Image EN-24Feature EN-25Adjustment of the image from the computer Image adjustmentImage adjustment Simple adjustment method EN-27EN-28 TroubleshootingImages aren’t projected on the screen Images aren’t projected correctly EN-29EN-30 Rainbow blurprojected imagesOthers EN-31Maintenance Cleaning of the projector and the ventilation slotsCleaning of the lens EN-32Indicators EN-33Normal condition Battery only EN-34Specifications EN-35EN-36 Dimensional drawings unit mmKensington Lock Optional accessories What’s included in the boxPin assignment of S-Video, Video and VGA terminals EN-37Signal mode Resolution H x EN-38Specification of Hdtv signals Signal modeKHz EN-39Europe Mitsubishi Projector Contact InformationNorth America Asia EN-41EN-42 Oceania EN-43EN-44