Mitsubishi Electronics XD250U-ST user manual Network settings

Page 28

Network settings (continued)

Setting or Clearing DHCP

1.Display the IP CONFIG menu.

2.Press the S or T button to select DHCP.

DHCP

ON

 

 

3.Press the ENTER button.

•Confirmation dialog appears.

4.Press the W or X button to select ON or OFF .

5.Select the item to set, and press the ENTER button.

•To cancel the setting, press the MENU button.

•It may take some time to reflect the settings.

•When setting DHCP to ON, IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those set- tings, set DHCP to OFF and perform the IP settings as the following procedures.

IP Address Settings

1.Display the IP CONFIG menu.

2.Press the S or T button to select IP ADDRESS.

IP ADDRESS

SET

3.Press the W or X button to select SET .

4.Press the ENTER button.

• IP ADDRESS screen appears.

5.Press the direction buttons to move the key cursor, select the numbers to enter, and press the ENTER button.

•Set the numeric value within the range from 0 to 255. How- ever, set the numeric value for the final octet within the range from 1 to 254.

← key: Shifting the position of enter cursor to the left.

→ key: Shifting the position of enter cursor to the right. DEL key:Deleting the character in the position of enter cur-

sor for each character.

6.When selecting OK, the setting is completed as the IP ADDRESS stored. However, when selecting CANCEL, the set- ting is completed without storing.

•The display returns the IP CONFIG menu after selecting OK or CANCEL.

•If the entered content is not correct, IP ADDRESS screen appears again after an error dialog is displayed.

•It may take some time to reflect the settings.

Subnet Mask Settings

1.Display the IP CONFIG menu.

2.Press the S or T button to select SUBNET MASK.

SUBNET MASK

SET

3.Press the W or X button to select SET .

4.Press the ENTER button.

• SUBNET MASK screen appears.

5.Enter the Subnet Mask.

• Refer to IP Address Settings for the detail of entering.

6.When selecting OK, the setting is completed as the Subnet Mask stored. However, when selecting CANCEL, the setting is completed without storing.

•The display returns the IP CONFIG menu after selecting OK or CANCEL.

•If the entered content is not correct, SUBNET MASK screen appears again after an error dialog is displayed.

•It may take some time to reflect the settings.

Default Gateway Settings

1.Display the IP CONFIG menu.

2.Press the S or T button to select DEFAULT GATEWAY.

DEFAULT

SET

GATEWAY

 

3.Press the W or X button to select SET .

4.Press the ENTER button.

• DEFAULT GATEWAY screen appears.

5.Enter the Default Gateway.

•Refer to IP Address Settings for the detail of entering.

6.When selecting OK, the setting is completed as the Default Gateway stored. However, when selecting CANCEL, the setting is completed without storing.

•The display returns the IP CONFIG menu after selecting OK or CANCEL.

•If the entered content is not correct, DEFAULT GATEWAY screen appears again after an error dialog is displayed.

•It may take some time to reflect the settings.

Setting or Clearing PJLink Certification

Perform the settings to start PJLink protocol communication.

•See page 32 for the detail of PJLink.

1.Display the NETWORK menu. (See page 20 for menu setting.)

2.Press the S or T button to select PJLink CERTIFICATION.

PJLinkON

CERTIFICATION

3.Press the ENTER button.

•Confirmation dialog appears.

4.Press the W or X button to select ON or OFF .

5.Select the item to set, and press the ENTER button.

•To cancel the setting, press the MENU button.

•It may take some time to reflect the settings.

Initialization of Network Settings

1.Display the NETWORK menu. (See page 27 for menu setting.)

2.Press the S or T button to select NETWORK RESET.

NETWORK RESET

OK

3.Press the ENTER button.

•Confirmation dialog appears.

4.If pressing the ENTER button again, the Network Settings can be initialized.

•It may take some time to reflect the settings.

EN-28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents XD250U-ST When using the projector in Europe ShockContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is operatingDo not unplug the power cord during operation Place of installationOverview Control panel Terminal board10 12 Kensington LockBottom side Remote control OverviewBattery installation Remote controlOperation range of the remote control Ceiling Mount Installation InstallationLayout of the projector Projector + AV device Basic connectionsProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsHdmi Projector + Computer Adjustment of the projection angle Using the adjustment feet frontPreparation Preparation for projectionPower-on When fine streaks are seen on projected imagesStatus Power Basic operationBasic operation When connecting to a laptop computer Wall ScreenMenu operation Quick Menu Basic operationQuick Menu Color Enhancer Auto Presentation ContrastMenu Options Menu operationInformation menu Detail Menu Image menu Basic operationImage Advanced menu Installation menu Feature menu Signal User menu Singal menuNetwork menu MenuEN-24 Image adjustment Adjusting projected imagesGamma mode Color EnhancerImage adjustment Simple method to adjust the image positionBrilliantColorTM LPF Progressive filterNetwork settings Setting Projector NameNetwork Password Settings IP SettingsNetwork settings How to Use Network Function GlossaryPassword function Advanced featuresFreeze Advanced features To cancel the password functionTo use the Magnify mode MagnifyMajor functions Supervising and controlling by computerConnection Lamp replacement When the projector is mounted to the ceilingInterval of lamp replacement Lamp replacementReset of the lamp operation time Power Status TroubleshootingNo image appears on the screen Images are not displayed correctly TroubleshootingLPF Maintenance Cleaning of the projector and the ventilation slotsCleaning of the lens OthersNormal condition IndicatorsAbnormal condition Specifications XD250U-STSpecifications ConnectorsDimensional drawings unit mm Replacement partCGA84 CGA85VGA60 VGA72Mitsubishi Electric Corporation
Related manuals
Manual 10 pages 47.68 Kb Manual 42 pages 47.27 Kb Manual 2 pages 29.19 Kb

XD250U-ST specifications

The Mitsubishi Electronics XD250U-ST is a versatile and compact projector designed to meet the needs of various professional environments, including classrooms, conference rooms, and small theatres. With its remarkable features and advanced technologies, this projector offers exceptional performance and reliability.

At the core of the XD250U-ST is its impressive resolution. It boasts a native SVGA resolution of 800 x 600 pixels, providing clear and detailed images that are vital for presentations and educational purposes. The projector has a brightness rating of 2500 ANSI lumens, ensuring that even in well-lit rooms, your visuals remain vivid and easily visible. The contrast ratio of 2000:1 further enhances image quality, allowing for deeper blacks and brighter whites, making your content more engaging.

One of the standout features of the XD250U-ST is its ultra-short throw capability. This technology enables the projector to create a large display from a very short distance, reducing the need for extensive installation space. With a throw ratio of just 0.5:1, it can project a 100-inch image from only about 4 feet away. This makes it particularly suitable for smaller rooms where placement options might be limited.

The XD250U-ST also incorporates advanced color reproduction technologies. With Mitsubishi’s proprietary color management system, the projector delivers vibrant colors and accurate color separation. This ensures that presentations, videos, and images appear true to life, enhancing overall visual impact.

In addition to its performance characteristics, the XD250U-ST offers a variety of connectivity options. It comes equipped with multiple input ports, including VGA, HDMI, and composite video, allowing for easy connections to a wide range of devices such as laptops, DVD players, and document cameras. The inclusion of an RS-232 port also allows for integration with control systems, facilitating seamless use in automated environments.

The projector is designed with user convenience in mind. It features an intuitive interface, making navigation and setup straightforward. With its lightweight and portable design, the XD250U-ST can easily be transported between different locations, making it an ideal choice for mobile professionals.

In summary, the Mitsubishi Electronics XD250U-ST combines high-quality projection capabilities with user-friendly features and advanced technologies, making it a reliable choice for anyone looking to enhance their visual presentation experience. Its combination of brightness, resolution, ultra-short throw capabilities, and connectivity options ensures that it can meet the demands of various applications, from education to business environments.
Top Page Image Contents