Mitsubishi Electronics XD250U-ST Advanced features, Magnify, To cancel the password function

Advanced features (continued)

To cancel the password function:

1.Display the FEATURE menu.

2.Press the S or T button to select PASSWORD FUNCTION.

3.Press the ENTER button.

• The screen for canceling the password function appears.

opt.

FEATURE

MENU ACCESS

LOCK	OK
UNLOCK	OK

4.Press the ENTER button.

• The screen for entering the password appears.

PASSWORD

1

4 2 O K : ENTER CANCEL : MENU

3

5.Enter a 4 - 8 digit password using the S, T, W or X buttons on

the remote control as shown below. (S=1, X=2, T=3, W=4)

6.Press the ENTER button.

•If you enter a wrong password, an error message appears.

•To cancel the procedure, press the MENU button.

Important:

•When the screen for entering the password is displayed, to disable the password function, hold down the SOURCE and POWER but- tons on the control panel together for about three seconds.

Magnify

By pressing the MAGNIFY button on the remote control, you can mag- nify the image to view the details.

•The MAGNIFY mode doesn't function with some input signals. For details, see page 41.

•The MAGNIFY mode doesn't work with video or S-video signal.

MAGNIFY

Magnified image

To use the MAGNIFY mode:

1.Press the MAGNIFY button.

•You can select the area to be magnified by pressing the S, T, W or X button on the remote control.

•You can change the magnification of the selected area by pressing the VOLUME S or T button.

2.Press the MAGNIFY button again to exit the MAGNIFY mode.

•The regular operation screen will appear.

Important:

•In the MAGNIFY mode, you can't adjust the volume.

ENGLISH

EN-31