Mitsubishi Electronics XD250U-ST user manual Lamp replacement, Interval of lamp replacement

Page 34

Lamp replacement (continued)

5. Remove the lamp attachment unit.

•Pull the lamp unit out of the projector slowly. If it is pulled out quickly, the lamp may break, scattering glass fragments.

•Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to pre- vent injuries or fire.

When the projector is mounted to the ceiling:

Confirm that the lamp unit (j) is securely held inside the lamp dispos- able bag of the lamp attachment unit. And then loosen the screw (h) that come with the lamp attachment unit. Then remove the lamp attachment unit.

6.Load a new lamp unit securely into the projector in the right orien- tation.

7.Secure the lamp cover (c) with screws (b) back again, and mount the cover (a).

•Make sure that the lamp cover is secured firmly. Otherwise, the POWER indicator flashes red and green, disallowing the projec- tor to be powered on.

Reset of the lamp operation time

1.Connect with the Power cord, and turn the power on.

2.Display DETAIL MENU. (See page 17.)

3.Select LAMP TIME RESET in INSTALLATION menu, and press ENTER button to reset lamp operation time.

Important:

•The projector doesn’t turn on if the lamp cover isn’t attached securely.

•Be sure to reset the lamp operation time whenever you replace the lamp.

•Do not reset the lamp operation time unless you replace the lamp.

Caution:

•The lamp is fragile. If it is broken, be careful not to cut yourself with glass fragments.

•Contact your dealer for a new lamp.

Interval of lamp replacement

The recommended interval of lamp replacement is about 6000 hours*1*2 of consecutive use. Such interval differs depending on the operating environment and may be shorter than 6000 hours*1*2. Decrease in luminescence and/or color brightness indicates that the lamp needs to be replaced. When the lamp operation time exceeds 4500 hours*1, the indicator will blink alternately between green and red (while the lamp is lit; when the lamp is not lit, the indicator will be lit red only) and the lamp replacement message will appear on the screen for one minute everytime the lamp is turned on. When the lamp has been used for about 5700 hours*1, the replacement message (LAMP EXCHANGE) will appear on the screen for one minute every 30 hours*1 thereafter. When the lamp operation time exceeds 6000 hours*1*2, the projector automatically shuts off and can’t be used until the lamp is replaced and the lamp operation time is reset.

*1: Duration when LAMP MODE of the INSTALLATION menu is set to LOW. When it is set to STANDARD, this duration will be shorted.

*2: When LAMP MODE is set to STANDARD, this duration will be shorted to 3000 hours.

Important:

•Do not open the lamp cover when the projector is set at a ceiling or a high place. Lamp fragments may fall from the inside if the lamp were broken.

Please contact your dealer when you need to replace the lamp with a new one.

Caution:

•This projector uses a lamp that contains mercury. Disposal of the lamp or the projector with the lamp may be regulated due to environ- mental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For US only).

EN-34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents XD250U-ST When using the projector in Europe ShockContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Place of installation10 12 OverviewControl panel Terminal board Kensington LockBottom side Remote control OverviewBattery installation Remote controlOperation range of the remote control Ceiling Mount Installation InstallationLayout of the projector Projector + AV device Basic connectionsProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsHdmi Projector + Computer Preparation Adjustment of the projection angleUsing the adjustment feet front Preparation for projectionStatus Power Power-onWhen fine streaks are seen on projected images Basic operationBasic operation When connecting to a laptop computer Wall ScreenQuick Menu Color Enhancer Auto Presentation Menu operationQuick Menu Basic operation ContrastMenu Options Menu operationInformation menu Detail Menu Image menu Basic operationImage Advanced menu Installation menu Feature menu Network menu Signal User menuSingal menu MenuEN-24 Gamma mode Image adjustmentAdjusting projected images Color EnhancerBrilliantColorTM Image adjustmentSimple method to adjust the image position LPF Progressive filterNetwork Password Settings Network settingsSetting Projector Name IP SettingsNetwork settings How to Use Network Function GlossaryPassword function Advanced featuresFreeze To use the Magnify mode Advanced featuresTo cancel the password function MagnifyMajor functions Supervising and controlling by computerConnection Lamp replacement When the projector is mounted to the ceilingInterval of lamp replacement Lamp replacementReset of the lamp operation time Power Status TroubleshootingNo image appears on the screen Images are not displayed correctly TroubleshootingLPF Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots OthersNormal condition IndicatorsAbnormal condition Specifications XD250U-STDimensional drawings unit mm SpecificationsConnectors Replacement partVGA60 CGA84CGA85 VGA72Mitsubishi Electric Corporation
Related manuals
Manual 10 pages 47.68 Kb Manual 42 pages 47.27 Kb Manual 2 pages 29.19 Kb

XD250U-ST specifications

The Mitsubishi Electronics XD250U-ST is a versatile and compact projector designed to meet the needs of various professional environments, including classrooms, conference rooms, and small theatres. With its remarkable features and advanced technologies, this projector offers exceptional performance and reliability.

At the core of the XD250U-ST is its impressive resolution. It boasts a native SVGA resolution of 800 x 600 pixels, providing clear and detailed images that are vital for presentations and educational purposes. The projector has a brightness rating of 2500 ANSI lumens, ensuring that even in well-lit rooms, your visuals remain vivid and easily visible. The contrast ratio of 2000:1 further enhances image quality, allowing for deeper blacks and brighter whites, making your content more engaging.

One of the standout features of the XD250U-ST is its ultra-short throw capability. This technology enables the projector to create a large display from a very short distance, reducing the need for extensive installation space. With a throw ratio of just 0.5:1, it can project a 100-inch image from only about 4 feet away. This makes it particularly suitable for smaller rooms where placement options might be limited.

The XD250U-ST also incorporates advanced color reproduction technologies. With Mitsubishi’s proprietary color management system, the projector delivers vibrant colors and accurate color separation. This ensures that presentations, videos, and images appear true to life, enhancing overall visual impact.

In addition to its performance characteristics, the XD250U-ST offers a variety of connectivity options. It comes equipped with multiple input ports, including VGA, HDMI, and composite video, allowing for easy connections to a wide range of devices such as laptops, DVD players, and document cameras. The inclusion of an RS-232 port also allows for integration with control systems, facilitating seamless use in automated environments.

The projector is designed with user convenience in mind. It features an intuitive interface, making navigation and setup straightforward. With its lightweight and portable design, the XD250U-ST can easily be transported between different locations, making it an ideal choice for mobile professionals.

In summary, the Mitsubishi Electronics XD250U-ST combines high-quality projection capabilities with user-friendly features and advanced technologies, making it a reliable choice for anyone looking to enhance their visual presentation experience. Its combination of brightness, resolution, ultra-short throw capabilities, and connectivity options ensures that it can meet the demands of various applications, from education to business environments.
Top Page Image Contents