Mitsubishi Electronics XD250U-ST user manual Singal menu, Signal User menu, Network menu, Menu

Page 23

Menu operation (continued)

4. SINGAL menu

 

Menu option

 

 

Setting

Feature description

HORIZ. POSITION

0-999

 

 

 

Select this setting to adjust the horizontal position of projected images.

 

 

 

 

 

 

 

 

VERT. POSITION

0-999

 

 

 

Select this setting to adjust the vertical position of projected images.

 

 

 

 

 

 

 

 

FINE SYNC.

0-31

 

 

 

Select this setting to eliminate flickering or blurs, if they appear, when

 

 

 

you are viewing projected images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRACKING

0-2800

 

 

Select this setting to eliminate vertical wide stripes, if they appear, when

 

 

you are viewing projected images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO

Automatically sets the appropriate setting.

 

 

 

 

 

 

 

 

 

 

RGB

Select this setting when you connect the projector to high definition

 

 

video equipment having R, G, and B output terminals.

COMPUTER INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select this setting when you connect the projector to a DVD player or

 

 

 

 

 

 

 

 

 

YCBCR/YPBPR

other device having Y, CB, and CR (or Y, PB, and PR) component video

 

 

 

 

 

 

 

output terminals.

 

 

 

 

 

 

 

 

OVER SCAN

100%-90%

 

Use this setting to adjust the display area of projected images.

 

 

 

 

 

 

 

 

HOLD

OFF / ON

 

 

Use this setting to adjust projected images when flagging occurs in the

 

 

upper area of the screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USER

OK

 

 

 

 

 

 

 

 

 

 

 

 

CLAMP POSITION

1-255

 

 

 

Use this setting to correct solid white or solid black that appears in pro-

 

 

 

 

jected images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLAMP WIDTH

1-63

 

 

 

Use this setting to correct solid black that appears in projected images.

 

 

 

 

 

 

 

 

 

VERT.SYNC

AUTO / OFF

Use this setting to adjust projected images when the motion is not

 

smooth. Select AUTO for most cases.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LPF

ON / OFF

Select this setting to enable or disable LPF.

 

 

 

 

 

 

 

 

 

SHUTTER(U)

0-20

 

 

 

Use this setting to adjust projected images when noise appears in the

 

 

 

 

top part of the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHUTTER(L)

0-20

 

 

 

Use this setting to adjust projected images when noise appears in the

 

 

 

 

bottom part of the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHUTTER(LS)

0-20

 

 

 

Use this setting to adjust projected images when noise appears in the

 

 

 

 

left half of the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHUTTER(RS)

0-20

 

 

 

Use this setting to adjust projected images when noise appears in the

 

 

 

 

right half of the image.

 

 

 

 

 

 

 

opt.

SIGNAL

 

HORIZ. POSITION

0

 

 

 

 

 

 

 

 

VERT. POSITION

0

 

 

 

 

 

 

 

 

FINE SYNC.

0

 

 

 

 

 

 

 

 

TRACKING

0

 

 

 

 

 

 

 

 

COMPUTER

RGB

 

RRGGBB INPUT

 

 

 

 

 

 

OVER SCAN

100%

 

 

 

 

 

 

 

HOLD

OFF

 

 

 

 

 

 

USER

OK

 

 

opt.

SIGNAL

USER

CLAMP

POSITION1

 

 

CLAMP WIDTH

1

 

 

 

 

 

?

VERT. SYNC.

AUTO

 

 

 

 

 

 

LPF

OFF

 

 

 

 

SHUTTER(U)0

SHUTTER(L)0

SHUTTER(LS)0

SHUTTER(RS)0

SIGNAL USER menu

ENGLISH

Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.

When you change the value of the horizontal or vertical position drastically, noise may appear.

The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value is changed. These conditions are not a malfunction.

SHUTTER does not work correctly during keystone adjustment.

When you increase the value of OVER SCAN, noise may appear on the screen.

Important:

You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.

5. NETWORK menu

Menu option

Setting

Feature description

 

*****...

Displays PROJECTOR NAME. Displays PROJECTOR NAME in

 

blank when PROJECTOR NAME is not set.

PROJECTOR NAME

 

 

 

SET

Set PROJECTOR NAME. Enter up to 15 characters (alphabets or

 

 

numeric characters).

 

 

 

 

 

NETWORK PASSWORD

OK

Set the password for Web control or PJLink certification.

 

 

 

IP CONFIG

OK

Select this setting for IP Configuration.

 

 

 

DHCP

ON / OFF

Use this setting when you obtain IP CONFIG automatically by

DHCP server.

 

 

opt.

 

NETWORK

 

PROJECTOR

SET

NAME

 

NETWORK

OK

PASSWORD

 

IP CONFIG

OK

PJLink

ON

CERTIFICATION

 

NETWORK RESET

OK

Displays IP ADDRESS. However, IP ADDRESS is not set as factory

opt.

***,***,***,***

 

default, and cannot be displayed.

 

 

IP ADDRESS

 

 

 

NETWORK

 

 

 

 

Set IP ADDRESS. When DHCP is set to ON, you cannot change

 

 

 

 

 

SET

 

IP CONFIG

 

 

 

 

 

this setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP

ON

 

 

 

 

***,***,***,***

Displays SUBNET MASK. However, SUBNET MASK is not set as

 

 

 

IP ADDRESS

192.168.0.10

 

 

factory default, and cannot be displayed.

 

 

SUBNET MASK

 

 

 

 

 

 

 

 

 

SUBNET MASK

255.255.255.0

 

 

 

 

 

 

Set SUBNET MASK. When DHCP is set to ON, you cannot change

 

 

 

 

 

 

 

 

 

 

SET

 

DEFAULT

10.132.1.1

 

 

this setting.

 

GATEWAY

 

 

 

 

 

 

 

 

 

 

 

 

MAC ADDRESS

xx-xx-xx-xx-xx-xx

 

 

 

 

 

 

 

***,***,***,***

Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is

 

 

 

 

 

 

 

 

 

NETWORK IP CONFIG

 

 

not set as factory default, and cannot be displayed.

 

DEFAULT GATEWAY

 

 

SET

Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot

menu

 

 

 

 

 

 

 

 

 

 

change this setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAC ADDRESS

xx-xx-xx-xx-xx-xx

Displays MAC ADDRESS.

 

 

 

 

 

 

 

 

 

 

 

 

 

PJLink CERTIFICATION

ON / OFF

Use this setting for PJLink Certification.

 

 

 

 

 

 

 

 

 

 

 

 

 

NETWORK RESET

OK

Resets the Network Setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EN-23

Image 23
Contents XD250U-ST Shock When using the projector in EuropeContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Do not unplug the power cord during operationKensington Lock OverviewControl panel Terminal board 10 12Overview Bottom side Remote controlOperation range of the remote control Remote controlBattery installation Layout of the projector InstallationCeiling Mount Installation Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV device Hdmi Basic connectionsConnection for video equipment having an Hdmi terminal Projector + Computer Preparation for projection Adjustment of the projection angleUsing the adjustment feet front PreparationBasic operation Power-onWhen fine streaks are seen on projected images Status PowerBasic operation Wall Screen When connecting to a laptop computerContrast Menu operationQuick Menu Basic operation Quick Menu Color Enhancer Auto PresentationInformation menu Menu operationMenu Options Detail Menu Image Advanced menu Basic operationImage menu Installation menu Feature menu Menu Signal User menuSingal menu Network menuEN-24 Color Enhancer Image adjustmentAdjusting projected images Gamma modeLPF Progressive filter Image adjustmentSimple method to adjust the image position BrilliantColorTMIP Settings Network settingsSetting Projector Name Network Password SettingsNetwork settings Glossary How to Use Network FunctionFreeze Advanced featuresPassword function Magnify Advanced featuresTo cancel the password function To use the Magnify modeConnection Supervising and controlling by computerMajor functions When the projector is mounted to the ceiling Lamp replacementReset of the lamp operation time Lamp replacementInterval of lamp replacement No image appears on the screen TroubleshootingPower Status LPF TroubleshootingImages are not displayed correctly Others MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensAbnormal condition IndicatorsNormal condition XD250U-ST SpecificationsReplacement part SpecificationsConnectors Dimensional drawings unit mmVGA72 CGA84CGA85 VGA60Mitsubishi Electric Corporation
Related manuals
Manual 10 pages 47.68 Kb Manual 42 pages 47.27 Kb Manual 2 pages 29.19 Kb

XD250U-ST specifications

The Mitsubishi Electronics XD250U-ST is a versatile and compact projector designed to meet the needs of various professional environments, including classrooms, conference rooms, and small theatres. With its remarkable features and advanced technologies, this projector offers exceptional performance and reliability.

At the core of the XD250U-ST is its impressive resolution. It boasts a native SVGA resolution of 800 x 600 pixels, providing clear and detailed images that are vital for presentations and educational purposes. The projector has a brightness rating of 2500 ANSI lumens, ensuring that even in well-lit rooms, your visuals remain vivid and easily visible. The contrast ratio of 2000:1 further enhances image quality, allowing for deeper blacks and brighter whites, making your content more engaging.

One of the standout features of the XD250U-ST is its ultra-short throw capability. This technology enables the projector to create a large display from a very short distance, reducing the need for extensive installation space. With a throw ratio of just 0.5:1, it can project a 100-inch image from only about 4 feet away. This makes it particularly suitable for smaller rooms where placement options might be limited.

The XD250U-ST also incorporates advanced color reproduction technologies. With Mitsubishi’s proprietary color management system, the projector delivers vibrant colors and accurate color separation. This ensures that presentations, videos, and images appear true to life, enhancing overall visual impact.

In addition to its performance characteristics, the XD250U-ST offers a variety of connectivity options. It comes equipped with multiple input ports, including VGA, HDMI, and composite video, allowing for easy connections to a wide range of devices such as laptops, DVD players, and document cameras. The inclusion of an RS-232 port also allows for integration with control systems, facilitating seamless use in automated environments.

The projector is designed with user convenience in mind. It features an intuitive interface, making navigation and setup straightforward. With its lightweight and portable design, the XD250U-ST can easily be transported between different locations, making it an ideal choice for mobile professionals.

In summary, the Mitsubishi Electronics XD250U-ST combines high-quality projection capabilities with user-friendly features and advanced technologies, making it a reliable choice for anyone looking to enhance their visual presentation experience. Its combination of brightness, resolution, ultra-short throw capabilities, and connectivity options ensures that it can meet the demands of various applications, from education to business environments.