Mitsubishi Electronics XD3200U user manual Adjusting projected images, Color Enhancer

Page 34

Adjusting projected images (continued)

To cancel the menu:

7. Press the MENU button.

To enable the stored color temperature:

1. Set COLOR TEMP. to USER in the QUICK MENU or set it to USER in the IMAGE menu.

About color temperature

There are different kinds of white color. Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. When the color temperature rises, white appears bluish. For example, you can change the color temperature using the following procedures.

To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).

To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).

If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can’t be obtained even when you maximize CONTRAST in the IMAGE menu.

Color Enhancer

You can set the user-defined balance between the brightness and hue using the setting.)

With the IMAGE menu:

menu. (See page 26 for menu

 

 

 

COLOR

AUTO

ENHANCER

 

 

 

 

1.

Display the IMAGE menu.

COLOR ENHANCER–USER

 

2.

Select COLOR ENHANCER by pressing the or button.

 

 

 

 

 

 

 

GAMMA MODE

 

DYNAMIC

3.

Select USER

 

by pressing the or button.

 

 

 

 

 

 

 

 

BrilliantColorTM

 

2

4.

Press the ENTER button.

 

 

 

 

 

 

 

RGB–COLOR

 

0

5.

Select an item you want to set by pressing the or button.

 

 

 

 

 

 

 

RGB–TINT

 

0

 

 

 

 

 

 

 

 

 

GAMMA mode

Use this item to set the gamma optimally.

DYNAMIC ��Select when viewing images supplied from the computer. NATURAL ��Select when viewing images supplied from the video device.

DETAIL ���Select when viewing images of which brightness should be kept relatively low, such as movies and music performance.

BrilliantColor™

Use this item to make the colors having medium brightness such as yellow and skin tone look natural. Press the button to decrease the value to lessen the effect. Press the button to increase the value to heighten the effect. (BrilliantColor™ doesn’t work at value 0.)

6. Select a setting value by pressing the or button.

For more enhanced color reproduction, set BrilliantColor™ to 0. The white portion of the color wheel will be disabled and you can reproduce true-to-life images.

RGB-COLOR

Use to adjust the color intensity of the projected image. Every time the button is pressed, the color becomes thicker. Every time the button is pressed, the color becomes lighter.

RGB-TINT

Use to adjust the color balance of the projected image. Every time the button is pressed, the image appears more greenish. Every time the button is pressed, the image appears more reddish.

Important:

You can adjust Color Enhancer also by pressing the CE button on the remote control.

With the remote control:

1.Press the CE button on the remote control.

A window for color enhancer adjustment appears on the upper right of the screen.

2.Press the or button to select USER.

3.Press the ENTER button.

4.Press the or button to select GAMMA MODE, BrilliantColor™, RGB-COLOR or RGB-TINT.

5.Press the or button to adjust the selected item.

EN-34

Image 34
Contents XD3200 EN-2 Contents Important safeguards Important safeguards Do not keep using the damaged projectorInserting the batteries into the remote control Checking accessoriesPreparing your projector Overview 1112 Power jack Main power switchPreparating your projector Control areaBottom side Remote controlAbout the laser beam Using the wired remote control Using the remote controlOperational range of the remote control Reception angleScreen size and projection distance Setting up your projectorSetting up the screen Front projectionWhen fine streaks are seen on projected images Setting up your projectorAdjusting the position of the projected image When projected images are distorted to a trapezoidFront projection, ceiling mounting Rear projectionConnecting the projector to a computer Viewing computer imagesAbout DDC Plugging the power cordViewing computer images For monitor connectionInstalling the terminal cover Projecting images Remove the lens capTo stop projecting Instant Shut DownExample of the setting procedure for external output When connecting to a notebook computerSetting of the resolution AV muteWhen using the BNC connector Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connectedProjector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having an Hdmi terminal Plugging in the power cord Connection for video equipment having a DVI-D terminalEN-22 EN-23 Setting the aspect ratio Volume from the speakerHow to change the settings With the remote control Menus displayed in the Detail Menu mode Menu display mode and menu typeMenus displayed in the Quick Menu mode Menu operationBasic procedure for setting the menus Menu operationSettings of each menu item Quick MenuEN-28 Image menu Advanced MenuEN-30 EN-31 Signal menu UserTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempAbout color temperature Adjusting projected imagesColor Enhancer How to adjust the computer image YESTo adjust the vertical position Simple method to adjust the image positionTo adjust the horizontal position LPF Progressive filterAdvanced features Setting procedureTo enable the password function Advanced featuresPassword function To cancel the password functionMagnifying the displayed image Picture in Picture PinPFreeze Operation Mouse remote controlProjector + computer with USB connector UP buttonMajor functions Supervising and controlling by computerConnection Normal condition IndicatorsAbnormal condition Interval of lamp replacement Replacing the lampReplacing the lamp Reset of the lamp operation timeTo replace the lamp Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots When removing the lamp from the ceiling-mounted projectorTroubleshooting No image appears on the screen Problem SolutionTroubleshooting Images are not displayed correctly Problem SolutionOthers Problem Solution EN-49 Specifications Replacement part option/not included in the boxSpecifications XGA85Dimension drawings unit mm ConnectorsWithout terminal cover Mitsubishielectric Corporation
Related manuals
Manual 17 pages 20.86 Kb