Mitsubishi Electronics HC900 user manual When using the projector in Europe, Compliance Notice

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera- ture accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS- TURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE IN- STALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power-supply cord, it may cause inter- ference with radio and television reception.

Use the attached RS-232C cable and RGB cable with this equipment so as to keep interference within the limit of a FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

WARNING

Use the attached RS-232C cable and RGB cable with this equipment so as to keep interference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

EN-2

Image 2
Contents HC900 When using the projector in Europe Compliance NoticeContents Important safeguards Do not modify this equipment Place of installationNever remove the cabinet Do not block the air inlet and outlet grillesInserting the batteries into the remote Checking accessoriesPreparating your projector ControlTerminal panel OverviewControl area ButtonAdjustment foot Front Lamp cover Adjustment feet Rear Remote controlUsing the picture quality adjusting buttons Preparating your projector ContinueReception angle Using the remote controlOperational range of the remote control Basic setup Setting up your projectorSetting up the screen Adjusting the projection angleWhen the aspect ratio of the screen is Screen size and projection distanceBasic home theater system connection Connecting the projector to video equipmentViewing video images PreparationsWhen a TV tuner or VCR is connected Connecting to a Video player, etcConnecting to a DVD player Viewing video images Plugging in the power cordConnecting to video equipment having a DVI-D terminal Projecting images PreparationCineFocus button When projected images are distorted to a trapezoidTo stop projecting With the remote control Setting the aspect ratioHow to change the settings With the Feature menuViewing computer images Connecting the projector to a computerPlugging the power cord For digital connectionEN-19 Viewing computer images When connecting to a notebook computerExample of the setting procedure for external output Auto Position buttonHow to set the menus Menu operationMenu operation Available settings in the menusInstallation menu Image menuFeature menu Signal MenuTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To sharpen or soften the projected image SharpnessTo enable the stored color temperature To adjust the tone of white Color TempAbout color temperature LPF Progressive filter Adjusting projected imagesTo adjust the vertical position To enable the password function Advanced featuresPassword function To cancel the password functionHow to install Advanced featuresInstallation other device’s remote commands How to use the installed functionsAsking for installation Dimension Drawings unit mmInterval of lamp replacement Replacing the lampCleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Reset of the lamp operation timeTroubleshooting No image appears on the screen Problem SolutionProblem Solution Images are not displayed correctlyTemperature TroubleshootingOthers Problem Solution Abnormal condition IndicatorsNormal condition Status ConditionSpecifications Replacement part Option / Not included in the boxConnectors DVI-D HdcpMitsubishi Projector Contact Information North America