Replacement of a light source lamp
The light source lamp is designed to project the image on the LCD panels. When the light source lamp no longer functions, replace it with a new one to ensure optimum performance.
Caution:
•Do not remove the light source lamp from inside of this equipment immediately after using the projec- tor, you may get burned because of the high tem- perature of the light source lamp.
•When you replace the light source lamp, press the power button to power off, then wait for 120 sec- onds in
•Do not remove the light source lamp except for re- placement. Careless treatment can cause injury or fire.
•Do not touch the lamp element directly. Oil residue on your hands could cause it to break and cause in- jury.
•Be sure not to drop the lamp lid screw into the pro- jector. Also be sure not to insert metal or any flam- mable objects, it may cause fire or an electric shock. If any objects are inserted, please unplug and con- tact your dealer.
•Install the lamp securely, failure may cause a fire.
1. Stand the projector as shown in the direction of the arrow.
Screw of the lamp lid
2.Loosen the screws of the lamp lid on the top cover us-
ing a phillips screwdriver
(+) , and remove the lid.
• Remove the lamp cover in the direction of the arrow as indicated.
3.Loosen screws (a) of fixing metal using a phillips screwdriver (+).
(a) |
4.Hold onto the projector by the handle as you pull out the lamp.
Once the lamp has been removed, do not spill liquid on it, place it near flammable objects or where chil- dren can touch it. Otherwise, it will cause injury or fire.
5.Insert the new lamp securely into the projector body in the right direction.
6. Tighten up the screws (a) to hold the piece in place.
(a) |
7.Tighten up the screws of the lamp lid using a phillips screwdriver (+).
32