Mitsubishi Electronics LVP-X120A Control this projector by using a personal computer Continue

Control this projector by using a personal computer (Continue)

[Example] Turn the power ON (' 'is for ASCII code)

Sending commands		Status code from	Meaning
from the PC etc.		projector
30 30 21 0D			Command for POWER ON
'0' '0' '!' ' '
	30 30 21 0D		Command received
	'0'	'0' '!' ' '	(Command echo back)

4) Operation commands

The operation commands execute the basic operation setting of this projector.It may not operate when changing the signal.

	ASCII	HEX
POWER ON	!	21h
POWER OFF	"	22h
INPUT RGB	_r1	5Fh	72h	31h
INPUT VIDEO	_v1	5Fh	76h	31h
INPUT CARD	_c1	5Fh	63h	31h

•POWER OFF command will not work for 1 minute after the power is turned on.

•POWER ON command will not work for 1 minute after the power is turned off.

[Example] Set the input signal to RGB (' 'is for ASCII code)

Sending commands	Status code from	Meaning
from the PC etc.	projector
30 30 5F 72 31 OD		Command for setting the input
'0' '0' '_' 'r' '1' ' '		signal to RGB
	30 30 5F 72 31 OD	Command received
	'0' '0' '_' 'r' '1' ' '	(Command echo back)

5) Remote commands

The some remote control operation can be done by remote command codes.

Button's name on remote	ASCII	HEX
+ VOLUME	r06	72h	30h	36h
– VOLUME	r07	72h	30h	37h
EXPAND	r02	72h	30h	32h
{	r53	72h	35h	33h
}	r2b	72h	32h	62h
$	r4f	72h	34h	66h
%	r59	72h	35h	39h
MENU	r54	72h	35h	34h
ENTER	r10	72h	31h	30h
AUTO PLAY(PC CARD)	r32	72h	33h	32h
RELEASE(PC CARD)	r22	72h	32h	32h
AUTO POSITION	r09	72h	30h	39h
STILL	ra4	72h	61h	34h

[Example] Display MENU selection bar. (' 'is for ASCII code)

Sending commands	Status code from	Meaning
from the PC etc.	projector
30 30 72 35 34 OD		Command as same as MENU button
'0' '0' 'r' '5' '4' ' '
	30 30 72 35 34 OD	Command received
	'0' '0' 'r' '5' '4' ' '	(Command echo back)