Mitsubishi Electronics LVP-XD10U specifications Remote Control, About laser beam

MAIN UNIT	FUNCTION
Menu	To correct the upper distortion of the projected image when
	keystone occurs.

X(Keystone +) To navigate through sub-pages or to increase the scale bar number.

W(Keystone -)To navigate through sub-pages or to decrease the scale bar number.

Exit (Auto)	To exit from the current page or OSD menu, and save setting
	changes.

B Remote Control

LED

STANDBY/ON

MENU

FREEZE

L-CLICK

MAGNIFY

RETURN

Figure 12 Remote control

LASER

EXIT

BLANK

R-CLICK

VOLUME

MUTE

BACK SIDE

About laser beam

This remote control is class 2 (max. output 1 mW laser diode 640 - 660 nm) laser equipment.

Beam Divergence : 3m distance about 5.0mm x 3.0mm (+/- 1.5mm)

CAUTION :

Pressing the LASER button on the provided remote control emits a laser beam. Do not look into the beam light directly. Do not point the laser beam at people. Looking at the laser beam directly may damage to your eyesight.

The use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

The remote control allows you to operate the function keys on the projector and to emulate mouse function when the projector is connected to a computer.

English 9