Resetting Lamp Timer

If replacing the lamp before reaching 1000 hours of operation, carry out the following procedure.

OSD

FUNCTION

Press the Standby/On button for 2 seconds to turn on

the lamp.

Press the MENU button to display the OSD menu,

and use the "X" (KEYSTONE+) or "W" (KEYSTONE-

Auto

Press <- or -> to reset.

Language

中

) buton to select the Control page. Then press the

Menu button again to highlight the Lamp item.

Mirror

Normal

V-Inv

H-Inv

H/V-Inv

The MENU is not displayed when the signal

Auto Off

0 (Stop)

is not input.

Lamp Hour

985.5

Hours

Press the "X" (KEYSTONE+) or "W" (KEYSTONE-)

button and the lamp usage time will display on the

bottom of the screen.

Within 3 seconds, press the MENU button to reset the

usage time.

If replacing the lamp after 1000 hours of operations, carry out the following procedure.

OSD	FUNCTION

	Press the Standby/On button for 2 seconds to turen
	on the lamp.
	Within 15 seconds after "AFTER 2 MINUTES,
	SYSTEM WILL POWER OFF" is displayed, press the
	MENU button twice consecutiely.
	Press the Standby/On button for 2 seconds to turn off
	the lamp.

OSD

Main OSD Menu

This Menu is not displayed when the signal is not input.

Press the "Menu" key and the main OSD menu structure will display as shown on the right (Fig. 19). Whenever AV box is attached, 4 sub-pages will display in the menu: Display page, Image page, Control page, and Source page. However, if the input is from a PC and no AV box is attached, Source page will not display in the menu.

Figure 19 Main OSD menu

Press the "Menu" key again to enter Display page items, or press "W" (KEYSTONE-) or "X" (KEYSTONE+) to select the sub-pages. (The main OSD menu will automatically disappear if no key is pressed within 10 seconds).

English 15