4.Replace the lamp with a new one and fix it using the same screw.
z Firmly tighten the lamp screw. Loose screws could result in a poor connection, which could cause the unit to malfunction.
5.Install the lamp cover and fix it using a screw.
zTo prevent burns, install the lamp cover and secure it using the screw.
zDo not turn on the power with the lamp cover removed.
zWhenever the lamp is replaced, reset the total operation time of the lamp. Do not reset if the lamp has not been replaced.
zDo not reset the timer without changing the lamp, as this can cause the lamp to break.
Press the lamp cover back with a few strength to
make sure the cover fits to the projector without leaks.