Mitsubishi Electronics HD4000 user manual EN-29, To adjust the vertical position

Page 29

This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See page 22.) When the signal is still not projected properly, adjust the projected image using the SIGNAL menu.

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image flickers.

The projected image is blurred. ………………………… Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally. ……… Adjust HORIZ.POSITION in the SIGNAL menu. Every time the

button is pressed, the image moves to the right. Every time the button is pressed, the image moves to the left.

The projected image is displaced vertically. ………… Adjust VERT.POSITION in the SIGNAL menu. Every time the

 

button is pressed, the image moves down. Every time the

 

button is pressed, the image moves up.

The top part of the image flags. ………………………

Change the setting of HOLD in the SIGNAL menu. Select ON

 

,

 

 

press the ENTER button, and adjust BEGIN or END to minimize

 

the flagging.

Wide strips appear. ………………………………………

Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL -

 

USER menu.

The motion doesn't run smoothly.………………………

Adjust VERT. SYNC. in the SIGNAL - USER menu. Select

 

AUTO for normal use.

Noise appears on the right or left half of the image. … Adjust SHUTTER (LS) or SHUTTER (RS) in the SIGNAL - USER

menu.

Noise appears on the top or bottom part of the image. …Adjust SHUTTER (U) or SHUTTER (L) in the SIGNAL - USER

 

menu.

1.

Display the SIGNALmenu.

2.

Press the or button to select an item to adjust.

3.

Adjust the selected item by pressing the or button.

To cancel the menu:

4. Press the MENU button.

• Do not change the settings of the SIGNAL menu in normal use.

Simple method to adjust the image position

To adjust the horizontal position:

1.Align the left edge of the image with the left side of the screen by adjusting HORIZ.POSITION. Then, align the right edge of the image with the right side of the screen by adjusting TRACKING.

2.Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT.POSITION.

LPF

You can select whether or not to enable the LPF. This item is set to OFF normally.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player or game console you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

1.

Display the SIGNAL menu.

 

 

 

 

 

 

 

 

2.

Press the

or

button to select USER.

 

 

 

 

 

 

LPF

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Press the ENTER button.

 

 

 

 

 

 

4.

Press the

or

button to select LPF.

 

 

 

 

 

 

5.

Press the

or

button to choose ON or OFF.

 

 

 

 

 

 

To cancel the menu:

6. Press the MENU button.

ENGLISH

EN-29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HD4000 Risk of Electric Shock Do not Open When using the projector in EuropeEN-2 Contents EN-4 Important safeguardsEN-5 Inserting the batteries into the remote control Checking accessoriesPreparing your projector CablesEN-7 OverviewControl area Terminal panel Using the picture quality adjusting buttons Remote controlPreparing your projector Bottom sideOperational range of the remote control Using the remote controlReception angle EN-9Setting up the screen Setting up your projectorBasic setup Adjusting the projection angleTo cancel the menu With the Installation menu See page 24 for menu settingTrigger terminal EN-11When the aspect ratio of the screen is Setting up your projectorScreen size and projection distance EN-12Viewing video images Connecting the projector to video equipmentBasic home theater system connection EN-13Connecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having a DVI-D terminal EN-15Connection for video equipment having a Hdmi terminal EN-16 Plugging in the power cordEN-17 Projecting imagesTo stop projecting When projected images are distorted to a trapezoidEN-18 Following casesHow to change the settings Setting the aspect ratioWith the remote control With the Feature menuPlugging the power cord Connecting the projector to a computerViewing computer images EN-20EN-21 Projecting imagesExample of the setting procedure for external output When connecting to a notebook computerViewing computer images Auto Position buttonEN-23 Menu operationAvailable settings in the menus How to set the menusMenu operation EN-24EN-25 Installation menuFeature menu EN-26 AV memoryTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To adjust the ratio of change in brightness Gamma ModeEN-29 To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionInstallation Using filterCleaning Cleaning the filterEN-32 Interval of lamp replacementReplacing the lamp Cleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time To replace the lampNo image appears on the screen Problem TroubleshootingSolution EN-34Problem Solution No image appears on the screen Problem SolutionEN-35 Images are not displayed correctlyImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-36Normal condition IndicatorsAbnormal condition EN-37EN-38 Dimension Drawings unit mmSpecifications Replacement part Option / Not included in the box ConnectorsEN-39 VLT-HC900LPMitsubishi Projector Contact Information

HD4000 specifications

Mitsubishi Electronics has long been a pioneer in the field of electronics, and their HD4000 model stands as a testament to their commitment to innovation and quality. Designed for both commercial and residential applications, the HD4000 integrates advanced technologies to deliver exceptional performance and versatility.

One of the standout features of the Mitsubishi HD4000 is its high-definition capabilities. With native support for 4K resolution, this model ensures crystal-clear images with stunning detail. The enhanced picture quality is complemented by advanced image processing technologies, including HDR (High Dynamic Range) support, which allows for a broader range of colors and contrasts. This results in a more lifelike viewing experience, making any visual content come alive.

In terms of connectivity, the HD4000 is equipped with multiple input options, including HDMI, USB, and VGA ports. This versatility enables seamless integration with various devices such as PCs, gaming consoles, and multimedia players. The built-in Wi-Fi capability further enhances its functionality, allowing users to stream content directly from the internet without the need for additional cables.

Mitsubishi has also prioritized energy efficiency in the HD4000. With its eco-friendly design and energy-saving features, this model not only reduces electricity consumption but also contributes to a lesser environmental impact. The automatic brightness adjustment feature is particularly noteworthy, as it optimizes the display according to ambient light conditions, ensuring optimal visibility while conserving energy.

The build quality of the HD4000 is robust, designed for longevity and reliability. The sleek design makes it suitable for various settings – from modern offices to home entertainment centers. The intuitive user interface simplifies navigation through the extensive features, making it accessible for users of all technical levels.

Additionally, the HD4000 comes equipped with advanced audio technologies that enhance the auditory experience. With integrated surround sound systems and support for various audio formats, users can expect rich and immersive sound quality that complements the stunning visuals.

Overall, the Mitsubishi Electronics HD4000 combines cutting-edge technology, energy efficiency, and superior build quality, making it an excellent choice for those seeking high-performance display solutions. Whether for professional use or home entertainment, the HD4000 promises to deliver an impressive viewing experience that meets the demands of modern users.
Top Page Image Contents