Mitsubishi Electronics HD4000 user manual Troubleshooting, EN-36, Others Problem Solution

Page 36

Troubleshooting (continued)

Images are not displayed correctly. (continued)

Problem

Solution

 

 

Images of WXGA

• Some signals may be recognized as XGA60 signal by mistake. When an image is not

signal are not

displayed carrying out the following operations, the signal may be an inapplicable

displayed correctly.

signal. In such cases, change the signal format of computer.

 

1. Set WXGA in the FEATURE menu to AUTO.

 

2. Display an image with many characters such as HELP menu and press the AUTO

 

POSITION button.

 

 

It takes abnormally

• When WXGA in the FEATURE menu is set to AUTO, it may take long time to detect

long time to display

WXGA signal or may cause misclassification of signals. In such cases, set it to OFF.

images of signals

 

other than WXGA, or

 

the images are not

 

displayed correctly.

 

Others

 

 

 

Problem

Solution

 

 

The exhaust vents

• This air comes out after cooling the inside of the projector. You may feel hot, but this is

emit warm air.

not a malfunction.

The menu can't be

• The microcomputers inside the projector may be wrongly operating because of noise.

Press the POWER button to turn off the lamp and unplug the power cord from the

used.

wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

 

 

 

“TEMPERATURE!!” is

• This indication appears when the ambient temperature rises high. When the ambient

displayed.

temperature stays high, the lamp goes out.

 

Eliminate any causes of the rise in the ambient temperature.

 

• This indication appears when the air inlet or outlet grille is blocked. When they are kept

 

blocked, the lamp goes out.

 

Remove the objects blocking the air inlet or outlet grille. Clean the filter, if clogged.

 

 

The mark appears.

• This mark appears when ineffective operation is carried out. This isn't a product

 

malfunction.

 

 

The remote control

• Check that the batteries are loaded in the remote control or the batteries are not weak.

doesn't function easily

(See page 6.)

or at all.

• Check that the remote control sensor isn't exposed to direct sunlight or fluorescent

 

light. (See page 9.)

 

• Use the remote control within its operation range. (See page 9.)

 

• Use the remote control at least 10 cm away from the projector.

 

 

The buttons on the

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to en-

control panel (except

able the password lock.

for the POWER button)

Cancel the password lock or contact the person in charge of management of the

don’t function.

projector. (See page 30.)

 

 

 

Abnormal sound is

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare

heard.

occasions. Such symptom is not a malfunction.

 

 

If the following problem occurs after the lamp is replaced, check the following first.

Problem

Solution

 

 

The projector does not

• Fit the lamp cover securely. (See pages 32 and 33.)

turn on.

•

Reset the lamp operating time. (See page 33.)

The STATUS indicator

•

Reset the lamp operating time. (See page 33.)

blinks.

 

 

 

 

 

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.

Kensington Technology Group 2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone : +1- (650)572-2700 Fax : +1- (650)572-9675

EN-36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents HD4000 When using the projector in Europe EN-2Risk of Electric Shock Do not Open Contents Important safeguards EN-4EN-5 Checking accessories Inserting the batteries into the remote controlPreparing your projector CablesOverview Control area Terminal panelEN-7 Remote control Using the picture quality adjusting buttonsPreparing your projector Bottom sideUsing the remote control Operational range of the remote controlReception angle EN-9Setting up your projector Setting up the screenBasic setup Adjusting the projection angleWith the Installation menu See page 24 for menu setting To cancel the menuTrigger terminal EN-11Setting up your projector When the aspect ratio of the screen isScreen size and projection distance EN-12Connecting the projector to video equipment Viewing video imagesBasic home theater system connection EN-13Connecting to a video player, etc Connecting to a DVD player or Hdtv decoderWhen a TV tuner or VCR is connected Viewing video imagesEN-15 Connection for video equipment having a Hdmi terminalConnection for video equipment having a DVI-D terminal Plugging in the power cord EN-16Projecting images EN-17When projected images are distorted to a trapezoid To stop projectingEN-18 Following casesSetting the aspect ratio How to change the settingsWith the remote control With the Feature menuConnecting the projector to a computer Plugging the power cordViewing computer images EN-20Projecting images EN-21When connecting to a notebook computer Example of the setting procedure for external outputViewing computer images Auto Position buttonMenu operation EN-23How to set the menus Available settings in the menusMenu operation EN-24Installation menu Feature menuEN-25 AV memory EN-26Adjusting projected images To adjust the brightness Contrast and BrightnessTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessAdjusting projected images To adjust the tone of white Color TempAbout color temperature To adjust the ratio of change in brightness Gamma ModeTo adjust the vertical position EN-29Advanced features Password functionTo enable the password function To cancel the password functionUsing filter InstallationCleaning Cleaning the filterInterval of lamp replacement Replacing the lampEN-32 Cleaning of the projector and the ventilation slots Cleaning of the lensReset of the lamp operation time To replace the lampTroubleshooting No image appears on the screen ProblemSolution EN-34No image appears on the screen Problem Solution Problem SolutionEN-35 Images are not displayed correctlyTroubleshooting Images are not displayed correctly Problem SolutionOthers Problem Solution EN-36Indicators Normal conditionAbnormal condition EN-37Dimension Drawings unit mm SpecificationsEN-38 Connectors Replacement part Option / Not included in the boxEN-39 VLT-HC900LPMitsubishi Projector Contact Information

HD4000 specifications

Mitsubishi Electronics has long been a pioneer in the field of electronics, and their HD4000 model stands as a testament to their commitment to innovation and quality. Designed for both commercial and residential applications, the HD4000 integrates advanced technologies to deliver exceptional performance and versatility.

One of the standout features of the Mitsubishi HD4000 is its high-definition capabilities. With native support for 4K resolution, this model ensures crystal-clear images with stunning detail. The enhanced picture quality is complemented by advanced image processing technologies, including HDR (High Dynamic Range) support, which allows for a broader range of colors and contrasts. This results in a more lifelike viewing experience, making any visual content come alive.

In terms of connectivity, the HD4000 is equipped with multiple input options, including HDMI, USB, and VGA ports. This versatility enables seamless integration with various devices such as PCs, gaming consoles, and multimedia players. The built-in Wi-Fi capability further enhances its functionality, allowing users to stream content directly from the internet without the need for additional cables.

Mitsubishi has also prioritized energy efficiency in the HD4000. With its eco-friendly design and energy-saving features, this model not only reduces electricity consumption but also contributes to a lesser environmental impact. The automatic brightness adjustment feature is particularly noteworthy, as it optimizes the display according to ambient light conditions, ensuring optimal visibility while conserving energy.

The build quality of the HD4000 is robust, designed for longevity and reliability. The sleek design makes it suitable for various settings – from modern offices to home entertainment centers. The intuitive user interface simplifies navigation through the extensive features, making it accessible for users of all technical levels.

Additionally, the HD4000 comes equipped with advanced audio technologies that enhance the auditory experience. With integrated surround sound systems and support for various audio formats, users can expect rich and immersive sound quality that complements the stunning visuals.

Overall, the Mitsubishi Electronics HD4000 combines cutting-edge technology, energy efficiency, and superior build quality, making it an excellent choice for those seeking high-performance display solutions. Whether for professional use or home entertainment, the HD4000 promises to deliver an impressive viewing experience that meets the demands of modern users.
Top Page Image Contents