Mitsubishi Electronics CP9600DW-S Connections, Setting of DIP Switches, Setting DIP Switches

Page 13

CONNECTIONS
			SETTING OF DIP SWITCHES
			SETTING OF DIP SWITCHES

2 SETTING DIP SWITCHES

All the switches are set to OFF at the time of shipment from the factory.


Turn off the power before changing the DIP switch settings.
Turn off the power before changing the DIP switch settings.








Switch No.	Setting	Function
1	OFF	Auto feed & cut mode
		When the door is closed after the print paper is installed with this unit powered on, this unit
		automatically carries out paper feed & cut operation.
	ON	Manual feed & cut mode
2	OFF	Set this switch to OFF.
	ON
3	OFF	Set this switch to OFF.
	ON
4	OFF	Set this switch to OFF.
	ON
5	OFF	Set this switch to ON.
	ON
6	OFF	Set this switch to OFF.
	ON
7	OFF	Set this switch to OFF.
	ON
8	OFF	Set this switch to OFF.
	ON

Image 13

Contents CP9600DW-S Information ContentsContents Contents Protective Measures Safety PrecautionsInstallation Locations Safety PrecautionsFor Long Operating Life Other Cautions Special Features Special FeaturesUnpacking UnpackingSeparate the printer from the cushions Unwrap the packingFront Panel Features & FunctionsSide and Rear Panel Features & FunctionsLeft Side Rear Connecting to Personal Computer Example Connection with USB Data Signal EquipmentConnections Setting DIP Switches Setting of DIP SwitchesConnections Before Operation Installation of Print PaperBefore Operation 4Install the print paper into the unitInstalling the INK Ribbon Installation of INK RibbonInstalling the INK Cassette 1Load the ink ribbon in the ink cassette as shown belowPush the center of the door to close Push the ink cassette toward the back of the unitBefore Printing Handling of Paper / INK Ribbon SETAfter Printing Storage of Paper / INK Ribbon SETIndications on the Front Panel and Countermeasures Error Messages & CountermeasuresWhen the manual & cut mode has been selected Error Messages & CountermeasuresOvercoming Paper Jams Remove the ink cassetteInstructions for Transportation Before Calling for ServiceUse the original packaging Preparations for Cleaning CleaningThermal Head Cleaning Paper Flange CleaningContents of CD-ROM SpecificationsMitsubishi Electric Europe B.V

CONNECTIONS