Mitsubishi Electronics CP9600DW-S operation manual Before Operation, Installation of Print Paper

Page 14

BEFORE OPERATION

Before printing,

1Install the print paper to this unit. (See below.)

2Install the ink ribbon to this unit. (page 13-14)

INSTALLATION OF PRINT PAPER

1Attach the supplied paper flanges to both sides of the print paper.

When you pinch the latches on the paper flange, the stoppers retract into the shaft.

Attach the flanges to the print paper with the stoppers retracted.

Make sure that the flanges are attached to the print paper securely, and release the latches.

NOTE

•Take care not to pinch your fingers.

•Do not remove the sticker on the print paper yet.

•Do not slacken the paper. Any slack in the print paper may degrade the print quality.

Sticker

CAUTION

•When placing the print paper, remove one flange and keep the print paper upright

on its side with no flange.

• When you put the print paper sideways, it may roll and fall. This may cause injury.

INCORRECT CORRECT

NOTE

Do not touch the thermal head.

Fingerprints or dust on the thermal head will degrade the print quality.

PRECAUTIONS
FEATURES

CONNECTIONS
PREPARATION

SHOOTING	TROUBLE-

OTHERS

CONTENTS

11

Image 14

Contents CP9600DW-S Contents InformationContents Contents Safety Precautions Protective MeasuresFor Long Operating Life Safety PrecautionsInstallation Locations Other Cautions Special Features Special FeaturesSeparate the printer from the cushions UnpackingUnpacking Unwrap the packingFeatures & Functions Front PanelLeft Side Rear Features & FunctionsSide and Rear Panel Connections Connection with USB Data Signal EquipmentConnecting to Personal Computer Example Connections Setting of DIP SwitchesSetting DIP Switches Installation of Print Paper Before Operation4Install the print paper into the unit Before OperationInstalling the INK Cassette Installation of INK RibbonInstalling the INK Ribbon 1Load the ink ribbon in the ink cassette as shown belowPush the ink cassette toward the back of the unit Push the center of the door to closeAfter Printing Handling of Paper / INK Ribbon SETBefore Printing Storage of Paper / INK Ribbon SETError Messages & Countermeasures Indications on the Front Panel and CountermeasuresOvercoming Paper Jams Error Messages & CountermeasuresWhen the manual & cut mode has been selected Remove the ink cassetteUse the original packaging Before Calling for ServiceInstructions for Transportation Thermal Head Cleaning CleaningPreparations for Cleaning Paper Flange CleaningSpecifications Contents of CD-ROMMitsubishi Electric Europe B.V