Mitsubishi Electronics CP9600DW-S operation manual Information, Contents

Page 2

INFORMATION

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute the risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including equipment malfunction) due to static electricity may occur in certain conditions.

The “ON/OFF” symbol indicates connection to or disconnection from the mains, at least for mains switches.

The “Alternating current” symbol indicates that the equipment is suitable for alternating current only.

PRECAUTIONS

FEATURES

 

CONNECTIONS

PREPARATION

SHOOTING

TROUBLE-

 

OTHERS

 

 

CONTENTS

Image 2
Contents CP9600DW-S Contents InformationContents Contents Safety Precautions Protective MeasuresFor Long Operating Life Safety PrecautionsInstallation Locations Other Cautions Special Features Special FeaturesSeparate the printer from the cushions UnpackingUnpacking Unwrap the packingFeatures & Functions Front PanelLeft Side Rear Features & FunctionsSide and Rear Panel Connections Connection with USB Data Signal EquipmentConnecting to Personal Computer Example Connections Setting of DIP SwitchesSetting DIP Switches Installation of Print Paper Before Operation4Install the print paper into the unit Before OperationInstalling the INK Cassette Installation of INK RibbonInstalling the INK Ribbon 1Load the ink ribbon in the ink cassette as shown belowPush the ink cassette toward the back of the unit Push the center of the door to closeAfter Printing Handling of Paper / INK Ribbon SETBefore Printing Storage of Paper / INK Ribbon SETError Messages & Countermeasures Indications on the Front Panel and CountermeasuresOvercoming Paper Jams Error Messages & CountermeasuresWhen the manual & cut mode has been selected Remove the ink cassetteUse the original packaging Before Calling for ServiceInstructions for Transportation Thermal Head Cleaning CleaningPreparations for Cleaning Paper Flange CleaningSpecifications Contents of CD-ROMMitsubishi Electric Europe B.V