Mitsubishi Electronics CP9600DW-S operation manual Other Cautions

Page 7

SAFETY PRECAUTIONS

OTHER CAUTIONS

•Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.

•Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.

•During printing on 15x23 (6x9”) size paper, the printer may stop printing temporarily for cooling down. (The COOLING indicator blinks.) Please wait for the printer to resume printing after its completion of cooling.

Do not touch the print paper.

•During printing, the printer may stop printing for about 90 seconds for cooling down. (The COOLING indicator blinks.) Please wait for the printer to resume printing after its completion of cooling.

•Each time printing on 15x23 (6x9”)-size paper is completed, remove the prints. If the prints are not removed, a paper jam may occur.

NOTE:

YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN OCCURRENCE OF A MALFUNCTION.

PRECAUTIONS

FEATURES

 

CONNECTIONS

PREPARATION

SHOOTING

TROUBLE-

 

OTHERS

 

 

CONTENTS

4

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CP9600DW-S Information ContentsContents Contents Protective Measures Safety PrecautionsInstallation Locations Safety PrecautionsFor Long Operating Life Other Cautions Special Features Special FeaturesUnwrap the packing UnpackingUnpacking Separate the printer from the cushionsFront Panel Features & FunctionsSide and Rear Panel Features & FunctionsLeft Side Rear Connecting to Personal Computer Example Connection with USB Data Signal EquipmentConnections Setting DIP Switches Setting of DIP SwitchesConnections Before Operation Installation of Print PaperBefore Operation 4Install the print paper into the unit1Load the ink ribbon in the ink cassette as shown below Installation of INK RibbonInstalling the INK Ribbon Installing the INK CassettePush the center of the door to close Push the ink cassette toward the back of the unitStorage of Paper / INK Ribbon SET Handling of Paper / INK Ribbon SETBefore Printing After PrintingIndications on the Front Panel and Countermeasures Error Messages & CountermeasuresRemove the ink cassette Error Messages & CountermeasuresWhen the manual & cut mode has been selected Overcoming Paper JamsInstructions for Transportation Before Calling for ServiceUse the original packaging Paper Flange Cleaning CleaningPreparations for Cleaning Thermal Head CleaningContents of CD-ROM SpecificationsMitsubishi Electric Europe B.V
Top Page Image Contents