Mitsubishi Electronics HC4000 user manual Specifications, Dimension drawings unit mm

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		DLPTM projector
Model		HC4000
Display technology		0.65-inch single chip DMD (aspect ratio 16:9)
		Pixel: 1920 x 1080 = 2073600 pixels
Projection lens		F3.0 - 3.5 f= 20.6 - 30.1 mm
Light-source lamp		230 W
Image size (projection distance)		50” min. to 300” max. (projection distance 1.5 to 9.3 m (Wide))
Maximum	Computer signal	Maximum resolution: 1600 x 1200 dots
resolution		Panel resolution: 1920 x 1080 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component signal	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
		Panel resolution: 1920 x 1080 dots
Computer input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
Video input		[Signal type]	[Terminal type]	[Line]
		HDMI	HDMI	1
		Video input	RCA	1
		S-video input	S	1
		Component video input	RCA x3 (YCBCR/YPBPR)	1
Control terminal/	SERIAL	RS-232C (Mini DIN 8-pin)
others
	TRIGGER	DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		3.3 A
Dimensions		345 mm (W) x 129 mm (H) x 270 mm (D) * Not including protrusion.
Weight		3.6 kg
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 (burst signal)
	Video input	Vp-p=1.0 V 75 (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75 (Y) (negative sync)
	input	Vp-p=0.7 V 75 (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 (negative sync)
		YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (HDMI)	HDMI interface (TMDS single link)

Dimension drawings (unit: mm)

HC4000

270

345

129

EN-45