Mitsubishi Electronics HC3100 user manual Speciﬁcations, Dimension drawings unit mm, EN-39

Page 39

Speciﬁcations

The speciﬁcations and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		HC3100
Display technology		0.65-inch single chip DMD (aspect ratio 15:9)
		Pixel: 1280 x 768 = 983040 pixels

Projection lens		F 2.4 - 2.6 f= 23 - 27.6 mm
Light-source lamp		200 W
Image size (projection distance)		40” min. to 275” max. (projection distance 1.3 to 10 m)
Maximum	Computer signal	Maximum resolution: 1280 x 1024 dots (analog)/compressed
resolution		Panel resolution: 1280 x 768 dots

	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i
	signal	Panel resolution: 1280 x 768 dots
Computer input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
		HDMI	HDMI 19-pin	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA	1
		S-video input	S	1
		Component video input	RCA	1
Control terminal/	SERIAL	RS-232C (8-pin)
others	TRIGGER	DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		2.9 A
Dimensions		310 mm (W) x 100 mm (H) x 245 mm (D)		* Not including protrusion.
Weight		2.9 kg
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y)	(negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)

	Digital input (HDMI)	HDMI interface (TMDS single link)

ENGLISH

Dimension drawings (unit: mm)

61

245

310

5 100

HDMI IN

SERIAL USB

COMPONENT VIDEO IN

TRIGGER

EN-39

Image 39

Contents HC3100 When using the projector in Europe EN-2Risk of Electric Shock Do not Open Contents EN-4 Important safeguardsEN-5 Checking accessories Inserting the batteries into the remote controlPreparing your projector Overview Control area Terminal panelEN-7 Bottom side Remote controlUsing the picture quality adjusting buttons Preparing your projectorEN-9 Using the remote controlOperational range of the remote control Reception angleAdjusting the projection angle Setting up your projectorSetting up the screen Basic setupEN-11 With the Installation menu See page 24 for menu settingTo cancel the menu Trigger terminalEN-12 Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceEN-13 Connecting the projector to video equipmentViewing video images Basic home theater system connectionViewing video images Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder When a TV tuner or VCR is connectedEN-15 Connection for video equipment having an Hdmi terminalConnection for video equipment having a DVI-D terminal EN-16 Plugging in the power cordEN-17 Projecting imagesFollowing cases When projected images are distorted to a trapezoidTo stop projecting EN-18With the Feature menu Setting the aspect ratioHow to change the settings With the remote controlEN-20 Connecting the projector to a computerPlugging the power cord Viewing computer imagesEN-21 Projecting imagesAuto Position button When connecting to a notebook computerExample of the setting procedure for external output Viewing computer imagesEN-23 Menu operationEN-24 How to set the menusAvailable settings in the menus Menu operationEN-25 Installation menuEN-26 Feature menuEN-27 AV memoryTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintEN-29 To adjust the tone of white Color TempAbout color temperature To adjust the ratio of change in brightness Gamma ModeAdjusting projected images To adjust the vertical positionEN-30 To cancel the password function Advanced featuresPassword function To enable the password functionCleaning the ﬁlter Using ﬁlterInstallation CleaningInterval of lamp replacement Replacing the lampEN-33 To replace the lamp Cleaning of the projector and the ventilation slotsCleaning of the lens Replacing the lampTroubleshooting No image appears on the screen ProblemSolutionEN-35 EN-36 TroubleshootingNo image appears on the screen Problem Solution Images are not displayed correctly Problem SolutionEN-37 Others Problem SolutionEN-38 IndicatorsNormal condition Abnormal conditionDimension drawings unit mm SpeciﬁcationsEN-39 EN-40 ConnectorsReplacement part Option/not included in the box SpeciﬁcationsMitsubishi Projector Contact Information