Before Printing, After Printing | Mitsubishi Electronics CP3020DAE

BEFORE OPERATION

USAGE AND STORAGE OF PAPER SHEET SET

2BEFORE PRINTING

•Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.

•When print paper is rapidly transferred from a cool place to a hot place, vapour or dew will be generated on the paper’s surface causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature before use.

•When print paper or ink sheet runs out during printing, the printing operation stops and the MEDIA indicator blinks. Set new ink sheet or print paper.

•Do not use wet or damaged paper. It may cause malfunction.

•Avoid touching or pulling the ink sheet with fingers. It may degrade the print quality.

•When the ink sheet is exhausted, replace it with a new one. Used ink sheet is not reusable.

•Do not open the print paper and ink sheet until you are ready to use them.

•The paper sheet set is a combination of ink sheet and print paper. Use the combination provided in the box. If the combination is changed, malfunction may occur.

2AFTER PRINTING

•When the printed paper is touched with a wet hand, the print may be discoloured.

•Fading may occur if the print-face is exposed to organic chemical agents which may affect print paper (e. g. alcohol, ester, ketone based).

•Fading will be accelerated upon contact with PVC-based materials (e. g. adhesive tapes, rubber erasers, etc.).

•Do not put a print back into the paper tray. Doing so can cause jams and loss of completed prints.

•Store prints in a cool, dry environment free of chemical contamination. Avoid exposure to high intensity light sources, particularly fluorescent light and sunlight, which are high in ultraviolet radiation.

2STORAGE OF PAPER SHEET SET

•Leaving the print paper in contact with PVC-based materials causes the print paper to discolour or become stained.

•Never store print paper close to heaters or in hot, humid or dusty places. Keep print paper in a place where;

Temperature	:	5°C - 30°C (41°F - 86°F)
Humidity	:	20% - 60%RH

INSTRUCTIONS FOR EXCHANGING INK SHEET

Any dust or dirt on the ink sheet may damage the thermal head. Please follow the instructions below.

•Place ink sheet only on a clean dry surface. The ink sheet box can be used as shown in the figure.

•Always handle ink sheet and ink cassette with clean hands.

•Before installing a new ink sheet, wipe any dirt from printer or ink cassette with a clean dry cloth.

PRECAUTIONS
FEATURES

CONNECTIONS
PREPARATION
SHOOTING	TROUBLE-

OTHERS