Mitsubishi Electronics CP3020DAE operation manual Risk of Electric Shock do not Open

Page 2

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

RISK OF ELECTRIC SHOCK DO NOT OPEN.

TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- FIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute the risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including equipment malfunction) due to static electricity may occur in certain conditions.

The “ON/OFF” symbol indicates connection to or disconnection from the mains, at least for mains switches.

The “Alternating current” symbol indicates that the equipment is suitable for alternating current only.

WARNING:

Use the AC power cord according to the recommendations as below, in order to comply with EN60950-1.

Connect to the 230V receptacle of the room or the host equipment.

The AC power cord should be VDE approved and consist of core size 1mm2 or bigger, length 2.5m or shorter cord with IEC60320-1/C13 type, 250V 10A or higher rating connector and CEE(7)VII type, 250V 10A or higher rating plug.

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and compo- nents which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in!

PRECAUTIONS

FEATURES

 

CONNECTIONS

PREPARATION

SHOOTING

TROUBLE-

 

OTHERS

 

 

Image 2
Contents CP3020DAE Risk of Electric Shock do not Open Contents Safety Precautions Protective MeasuresFor Long Operating Life Safety PrecautionsInstallation Locations Other Cautions Special Features Special FeaturesUnpacking UnpackingFeatures & Functions Front PanelRear Panel Features & FunctionsCancelling Continuous Printing USB PortConnection with USB Interface Connecting with a Personal ComputerConnections Removing the Shipping Inserts Before OperationPaper Sheet SET 2REMOVING the Shipping Inserts on the Paper Tray SlotBefore Operation INK Sheet Installation2INSTALLATION of INK Sheet Remove old ink sheet from the ink cassettePrint Paper Installation Remove the protection sheet placed on top of the paper Before Printing Usage and Storage of Paper Sheet SETInstructions for Exchanging INK Sheet After PrintingPrinter Driver Installation CPD3020AXAlarm Media Data Ready TroubleshootingFront Panel Indicators & Countermeasures Troubleshooting Before Calling for ServiceClearing a Paper JAM from the INK Cassette Area 5Install the ink cassetteOvercoming Paper Jams Pull out the jammed paperRepairing a Torn INK Sheet Cleaning Thermal Head CleaningOptions SpecificationsSpec & Options French Branch