Onkyo 29400468 Connecting a Recording Component, AV Recording, Recording Separate AV Sources

Page 23

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

Connecting a Recording Component

Recording Separate AV Sources

L

R

AUDIO

VIDEO

IN

IN

VCR,

Cassette, CDR,

DVD recorder

MD, etc.

Note

•The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

•If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV receiver, con- nect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals sup- plied with your TV and VCR for details.

•Video signals connected to composite video inputs can be recorded only via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.

•The surround sound and DSP listening modes cannot be recorded.

•Copy-protected Blu-ray discs and DVDs cannot be recorded.

•Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.

•DTS signals will be recorded as noise, so don’t attempt analog recording of DTS CDs or LDs.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette deck, CDR, MD) connected to the VCR/DVR OUT jacks. Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder) connected to the VCR/DVR OUT jack.

 

 

1

Use the input selector buttons to select the source

 

that you want to record.

 

You can watch the source while recording. The AV

 

receiver’s MASTER VOLUME control has no effect

 

on recording.

 

 

2

On your recorder, start recording.

3

On the source component, start playback.

 

If you select another input source during recording,

that input source will be recorded.

Here you can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (TV/CD) is selected, the video input source remains unchanged.

In the following example, audio from the CD player con- nected to the TV/CD IN and video from the camcorder connected to the BD/DVD IN are recorded by the VCR connected to the VCR/DVR OUT jacks.

Camcorder

CD player

VCR

 

: Video signal

 

: Audio signal

1 Prepare the camcorder and CD player for play- back.

2 Prepare the VCR for recording.

3 Press BD/DVD input selector.

4 Press TV/CD input selector.

This selects the CD player as the audio source, but leaves the camcorder as the video source.

5 Start recording on the VCR and start playback on the camcorder and CD player.

The video from the camcorder and the audio from the CD player are recorded by the VCR.

En

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents HT-RC230 Away from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the Remote Controller Supplied AccessoriesUsing the Remote Controller Installing the BatteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Front & Rear PanelsFront Speakers B terminals UREMOTE Control jackDisplay Rear PanelControlling the AV Receiver Remote ControllerEnjoying Home Theater About Home TheaterSpeakers a and B Speaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationSpeakers a Connecting the Speaker CablesConnecting a Powered Subwoofer Hdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksAudio return channel ARC function Connecting Components with HdmiJack Signal Components How to record the video Connecting External ComponentsUsing the AUX Input jack on the front panel Remote Control Connecting Onkyo uComponentsConnecting Antenna System On/Auto Power OnVideo Connection Formats On-screen setup menus are displayed whenDepends on the Audio TV OUT setting Which Connections Should I Use?Turning Off Turning On/Off the AV ReceiverTurning On Press Music Optimizer on the front panel Using the Music OptimizerSetting the Display Brightness Displaying Source InformationChanging the Input Display Using the Sleep TimerUsing Headphones Muting the AV ReceiverListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting FM/AM StationsSelecting Presets Recording Separate AV Sources Connecting a Recording ComponentRecording AV RecordingStereo button MOVIE/TV buttonMusic button Game buttonSpeaker Layout Listening ModesListening modes cannot be selected with some source formats Onkyo-Original DSP Listening ModesCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Explanatory Notes Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputSp Distance Speaker Distance Sp Config Speaker ConfigurationLevel Cal Level Calibration Audio AdjustMultiplex/Mono Settings Dolby SettingsHardware Hdmi SetupName Edit Audio Return Ch ARC Power ControlLipSync Hdmi Control RihdLate Night Function Using the Audio SettingsTone Control Settings Speaker LevelsSync Music OptimizerCinemaFILTER Audio SelectorBass Treble Digital Input Signal FormatsAdjusting the Bass & Treble Onkyo Dock Cable Connecting an Onkyo DockControlling iPod Models sold are different depending on the regionRI Dock Using the Onkyo DockUP-A1 Dock With the RI Control Controlling Your iPodWithout the RI Control Display *6 Muting Album + VOL q / w Menu Return Available buttons3, 2, 5 RepeatControlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsDisc + Cassettetape deckNumber 1 to Number +10 There’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverOnly the front speakers produce sound There’s no sound with a certain signal formatVolume cannot be set to About DTS signalsThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workStand-by power consumption Sound changes when I connect my headphonesVideo Attenuation Video ATT0 defaultTuner Section SpecificationsAmplifier Section Video SectionAbout Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsMemo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

29400468 specifications

Onkyo has long been synonymous with high-quality audio, and the Onkyo 29400468 model exemplifies this commitment to excellence. This advanced audio device is designed to deliver an immersive listening experience, making it a noteworthy choice for audiophiles and casual listeners alike.

One of the standout features of the Onkyo 29400468 is its high-fidelity sound reproduction. It employs a sophisticated amplifier design that allows for a wide dynamic range and crisp clarity. Users can expect a robust bass response balanced with smooth mids and highs, ensuring that every note is delivered with precision. The unit supports modern audio formats, enhancing its versatility across various media types.

In terms of connectivity, the Onkyo 29400468 offers a comprehensive array of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The inclusion of digital audio inputs ensures compatibility with a wide range of sources, enhancing convenience and accessibility. Bluetooth technology is also integrated, enabling seamless wireless streaming from smartphones and tablets.

The Onkyo 29400468 is equipped with advanced processing technologies, including DTS:X and Dolby Atmos, which create a multi-dimensional soundstage. These formats enable users to experience audio as intended by the content creators, providing a cinema-like experience in the comfort of their own home. Additionally, the device features built-in EQ settings, allowing users to tailor the sound profile to their personal preferences.

Another impressive characteristic of the Onkyo 29400468 is its user-friendly interface. The device is designed with a clear and intuitive layout, making it easy for users to navigate settings and options. An accompanying mobile app further enhances usability, providing remote control capabilities and easy access to streaming services.

With its durable build quality and aesthetically pleasing design, the Onkyo 29400468 fits seamlessly into any audio setup. Its compact dimensions allow for easy placement in various environments, whether it's a small apartment or a larger home theater.

Ultimately, the Onkyo 29400468 represents a perfect fusion of sound quality, modern technology, and user-friendly features, making it a premier choice for anyone looking to elevate their audio experience.
Top Page Image Contents