Onkyo 29400468 instruction manual Using the Onkyo Dock, UP-A1 Dock, RI Dock

Page 37

Using the Onkyo Dock

Dock is sold separately.

For the latest information on the Onkyo Dock compo- nents, see the Onkyo web site at: http://www.onkyo.com

Before using the Onkyo Dock components, update your iPod with the latest software, available from the Apple web site.

For supported iPod models, see the instruction man- ual of the Onkyo Dock.

UP-A1 Dock

With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your iPod through the AV receiver and enjoy great sound.

You can use the AV receiver’s remote controller to operate your iPod.

■Basic Operation

The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song.

Auto Power On

If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source.

Direct Change

If you start iPod playback while listening to another input source, the AV receiver will automatically select your iPod as the input source.

Using the AV receiver’s Remote Controller

You can use the AV receiver’s remote controller to control basic iPod functions (➔ 38).

■Operating Notes

•Functionality depends on your iPod model and generation.

•Before selecting a different input source, stop iPod playback to prevent the AV receiver from selecting the iPod input source by mistake.

•If any accessories are connected to your iPod, the AV receiver may not be able to select the input source properly.

•When connecting UP-A1 Dock to the radio tuner UP-HT1 with AUTO selected by the tuner’s Mode Selector switch, you can switch the input source between UP-A1 Dock and the tuner, by pressing PORT repeatedly on the front panel.

•While your iPod is in the UP-A1 Dock, its volume control has no effect. If you adjust your iPod models volume control while it’s in the UP-A1 Dock, make sure it’s not set too high before you reconnect your headphones.

•The Auto Power On function will not work if you set your iPod in the UP-A1 Dock while it is playing.

•Do not turn off the power with the iPod still connected to this unit via the UP-A1 Dock.

•Set your iPod in the UP-A1 Dock after the AV receiver turns on.

■Using Your iPod models Alarm Clock

You can use your iPod models Alarm Clock function to automatically turn on your iPod and the AV receiver at a specified time. The AV receiver’s input source will auto- matically be set to the PORT selector.

Note

•To use this function, your iPod must be in the UP-A1 Dock, and the UP-A1 Dock must be connected to the AV receiver.

•This function only works when the Standard mode is set to On.

•When you use this function, be sure to set the AV receiver’s vol- ume control to a suitable level.

•You cannot use this function for sound effects on your iPod.

■Charging Your iPod models Battery

The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jack on the AV receiver. While your iPod is seated in the UP-A1 Dock, its battery will be charged when the AV receiver is set to “On” or “Standby”.

Note

•When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases.

■Status Messages

• PORT Reading

The AV receiver is checking the connection with the dock.

• PORT Not Support

The AV receiver do not support the connected dock.

• PORT UP-A1

UP-A1 Dock is connected.

Note

•The AV receiver displays the message “UP-A1” for several sec- onds after recognizing the UP-A1.

•When the status message is not displayed on the AV receiver’s display, check the connection to your iPod.

RI Dock

With the RI Dock, you can easily play the music stored on your iPod through the AV receiver and enjoy great sound, and watch iPod slideshows and videos on your TV. In addition, the onscreen display (OSD) allows you to view, navigate, and select your iPod model’s contents on your TV, and with the supplied remote controller, you can con- trol your iPod from the comfort of your sofa. You can even use the AV receiver’s remote controller to operate your iPod.

Note

•Enter the appropriate remote control code before using the AV receiver’s remote controller for the first time (➔ 40).

•Connect the RI Dock to the AV receiver with an ucable (➔ 36).

•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/ DOCK”.

•Set the AV receiver’s Input Display to “DOCK” (➔ 20).

En

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HT-RC230 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Using the Remote Controller Supplied AccessoriesInstalling the Batteries Aiming the Remote ControllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsDisplay UREMOTE Control jackRear Panel Front Speakers B terminalsControlling the AV Receiver Remote ControllerSpeakers a and B About Home TheaterEnjoying Home Theater Connecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Speaker Connection PrecautionsConnecting a Powered Subwoofer Connecting the Speaker CablesSpeakers a Connected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Signal Components Connecting Components with HdmiAudio return channel ARC function Using the AUX Input jack on the front panel Connecting External ComponentsHow to record the video Connecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlDepends on the Audio TV OUT setting On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off Setting the Display Brightness Using the Music OptimizerDisplaying Source Information Press Music Optimizer on the front panelUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayTuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioSelecting Presets Presetting FM/AM StationsDeleting Presets Recording Connecting a Recording ComponentAV Recording Recording Separate AV SourcesMusic button MOVIE/TV buttonGame button Stereo buttonSpeaker Layout Listening ModesListening modes cannot be selected with some source formats Onkyo-Original DSP Listening ModesOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Component Component Video Input Hdmi InputDigital Audio Digital Audio Input Explanatory NotesSp Distance Speaker Distance Sp Config Speaker ConfigurationMultiplex/Mono Settings Audio AdjustDolby Settings Level Cal Level CalibrationName Edit Hdmi SetupHardware LipSync Power ControlHdmi Control Rihd Audio Return Ch ARCTone Control Settings Using the Audio SettingsSpeaker Levels Late Night FunctionCinemaFILTER Music OptimizerAudio Selector SyncAdjusting the Bass & Treble Digital Input Signal FormatsBass Treble Controlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Without the RI Control Controlling Your iPodWith the RI Control 3, 2, 5 Available buttonsRepeat Display *6 Muting Album + VOL q / w Menu ReturnEntering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsNumber 1 to Number +10 Cassettetape deckDisc + Standby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundStand-by power consumption Remote controller doesn’t workSound changes when I connect my headphones There’s no picture from a source connected to an HdmiVideo Attenuation Video ATT0 defaultAmplifier Section SpecificationsVideo Section Tuner SectionSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerMemo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

29400468 specifications

Onkyo has long been synonymous with high-quality audio, and the Onkyo 29400468 model exemplifies this commitment to excellence. This advanced audio device is designed to deliver an immersive listening experience, making it a noteworthy choice for audiophiles and casual listeners alike.

One of the standout features of the Onkyo 29400468 is its high-fidelity sound reproduction. It employs a sophisticated amplifier design that allows for a wide dynamic range and crisp clarity. Users can expect a robust bass response balanced with smooth mids and highs, ensuring that every note is delivered with precision. The unit supports modern audio formats, enhancing its versatility across various media types.

In terms of connectivity, the Onkyo 29400468 offers a comprehensive array of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The inclusion of digital audio inputs ensures compatibility with a wide range of sources, enhancing convenience and accessibility. Bluetooth technology is also integrated, enabling seamless wireless streaming from smartphones and tablets.

The Onkyo 29400468 is equipped with advanced processing technologies, including DTS:X and Dolby Atmos, which create a multi-dimensional soundstage. These formats enable users to experience audio as intended by the content creators, providing a cinema-like experience in the comfort of their own home. Additionally, the device features built-in EQ settings, allowing users to tailor the sound profile to their personal preferences.

Another impressive characteristic of the Onkyo 29400468 is its user-friendly interface. The device is designed with a clear and intuitive layout, making it easy for users to navigate settings and options. An accompanying mobile app further enhances usability, providing remote control capabilities and easy access to streaming services.

With its durable build quality and aesthetically pleasing design, the Onkyo 29400468 fits seamlessly into any audio setup. Its compact dimensions allow for easy placement in various environments, whether it's a small apartment or a larger home theater.

Ultimately, the Onkyo 29400468 represents a perfect fusion of sound quality, modern technology, and user-friendly features, making it a premier choice for anyone looking to elevate their audio experience.
Top Page Image Contents