Onkyo 29400468 Troubleshooting, Can’t turn on the AV receiver, Standby indicator flashes red

Page 43

Troubleshooting

If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your- self, contact your Onkyo dealer.

If you can’t resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer.

To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press ON/ STANDBY. “Clear” will appear on the display and the AV receiver will enter Standby mode.

Note that resetting the AV receiver will delete your radio presets and custom settings.

Remote indicator

RECEIVER

AUDIO

To reset the remote controller to its factory defaults, while holding down RECEIVER, press and hold down AUDIO until the remote indicator lights (about 3 sec- onds). Within 30 seconds, press RECEIVER

again.

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is con- nected to the MONITOR OUT V or the COMPO- NENT VIDEO OUT, use the AV receiver’s display when changing settings.

Power

■Can’t turn on the AV receiver

Make sure that the power cord is properly plugged — into the wall outlet.

Unplug the power cord from the wall outlet, wait five — seconds or more, then plug it in again.

■The STANDBY indicator flashes red

The protection circuitry has been activated.

—

Remove the power cord from the wall outlet immedi-

 

ately. Disconnect all speaker cables and input

 

sources, and then leave the AV receiver with its

 

power cord disconnected for 1 hour. After that,

 

reconnect the power cord and set the volume to max-

 

imum. If the AV receiver stays on, set then the vol-

 

ume to minimum, disconnect the power cord, and

 

reconnect your speakers and input sources. If the AV

 

receiver turns off when you set the volume to maxi-

 

mum, disconnect the power cord, and contact your

 

Onkyo dealer.

 

Audio

■There’s no sound, or it’s very quiet

Press SPEAKERS A or B to turn on the indicator

—

for the speakers that you want to output sound.

 

 

 

Make sure that the digital input source is selected

28

properly.

 

Make sure that all audio connecting plugs are pushed

13

in all the way.

 

 

 

Make sure that the inputs and outputs of all compo-

14-16

nents are connected properly.

 

Make sure that the polarity of the speaker cables is

11

correct, and that the bare wires are in contact with

 

the metal part of each speaker terminal.

 

 

 

Make sure that the input source is properly selected.

19

Make sure that the speaker cables are not shorting.

11

 

 

Check the volume. The AV receiver is designed for

—

home theater enjoyment. It has a wide volume range,

 

allowing precise adjustment.

 

If the MUTING indicator is flashing on the display,

20

press the remote controller’s MUTING to unmute

 

the AV receiver.

 

 

 

While a pair of headphones is connected to the

20

PHONES jack, no sound is output by the speakers.

 

If there’s no sound from a DVD player connected to

—

an HDMI IN, check the DVD player’s output set-

 

tings, and be sure to select a supported audio format.

 

 

 

Check the digital audio output setting on the con-

—

nected device. On some game consoles, such as

 

those that support DVD, the default setting is off.

 

With some DVD-Video discs, you need to select an

—

audio output format from a menu.

 

 

 

If your turntable uses an MC cartridge, you must

—

connect an MC head amp, or an MC transformer.

 

Make sure that none of the connecting cables are

—

bent, twisted, or damaged.

 

 

 

Not all listening modes use all speakers.

24

Specify the speaker distances and adjust the individ-

29

ual speaker levels.

 

 

 

The input signal format is set to PCM or DTS. Set it

35

to Auto.

 

 

 

En

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HT-RC230 Away from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the Remote Controller Supplied AccessoriesUsing the Remote Controller Installing the BatteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Front & Rear PanelsFront Speakers B terminals UREMOTE Control jackDisplay Rear PanelControlling the AV Receiver Remote ControllerSpeakers a and B About Home TheaterEnjoying Home Theater Speaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationConnecting a Powered Subwoofer Connecting the Speaker CablesSpeakers a Hdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksJack Signal Components Connecting Components with HdmiAudio return channel ARC function Using the AUX Input jack on the front panel Connecting External ComponentsHow to record the video Remote Control Connecting Onkyo uComponentsConnecting Antenna System On/Auto Power OnVideo Connection Formats On-screen setup menus are displayed whenDepends on the Audio TV OUT setting Which Connections Should I Use?Turning On Turning On/Off the AV ReceiverTurning Off Press Music Optimizer on the front panel Using the Music OptimizerSetting the Display Brightness Displaying Source InformationChanging the Input Display Using the Sleep TimerUsing Headphones Muting the AV ReceiverListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioSelecting Presets Presetting FM/AM StationsDeleting Presets Recording Separate AV Sources Connecting a Recording ComponentRecording AV RecordingStereo button MOVIE/TV buttonMusic button Game buttonSpeaker Layout Listening ModesListening modes cannot be selected with some source formats Onkyo-Original DSP Listening ModesOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory Notes Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputSp Distance Speaker Distance Sp Config Speaker ConfigurationLevel Cal Level Calibration Audio AdjustMultiplex/Mono Settings Dolby SettingsName Edit Hdmi SetupHardware Audio Return Ch ARC Power ControlLipSync Hdmi Control RihdLate Night Function Using the Audio SettingsTone Control Settings Speaker LevelsSync Music OptimizerCinemaFILTER Audio SelectorAdjusting the Bass & Treble Digital Input Signal FormatsBass Treble Onkyo Dock Cable Connecting an Onkyo DockControlling iPod Models sold are different depending on the regionUP-A1 Dock Using the Onkyo DockRI Dock Without the RI Control Controlling Your iPodWith the RI Control Display *6 Muting Album + VOL q / w Menu Return Available buttons3, 2, 5 RepeatControlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsNumber 1 to Number +10 Cassettetape deckDisc + There’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverOnly the front speakers produce sound There’s no sound with a certain signal formatVolume cannot be set to About DTS signalsThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workStand-by power consumption Sound changes when I connect my headphonesVideo Attenuation Video ATT0 defaultTuner Section SpecificationsAmplifier Section Video SectionSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsMemo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

29400468 specifications

Onkyo has long been synonymous with high-quality audio, and the Onkyo 29400468 model exemplifies this commitment to excellence. This advanced audio device is designed to deliver an immersive listening experience, making it a noteworthy choice for audiophiles and casual listeners alike.

One of the standout features of the Onkyo 29400468 is its high-fidelity sound reproduction. It employs a sophisticated amplifier design that allows for a wide dynamic range and crisp clarity. Users can expect a robust bass response balanced with smooth mids and highs, ensuring that every note is delivered with precision. The unit supports modern audio formats, enhancing its versatility across various media types.

In terms of connectivity, the Onkyo 29400468 offers a comprehensive array of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The inclusion of digital audio inputs ensures compatibility with a wide range of sources, enhancing convenience and accessibility. Bluetooth technology is also integrated, enabling seamless wireless streaming from smartphones and tablets.

The Onkyo 29400468 is equipped with advanced processing technologies, including DTS:X and Dolby Atmos, which create a multi-dimensional soundstage. These formats enable users to experience audio as intended by the content creators, providing a cinema-like experience in the comfort of their own home. Additionally, the device features built-in EQ settings, allowing users to tailor the sound profile to their personal preferences.

Another impressive characteristic of the Onkyo 29400468 is its user-friendly interface. The device is designed with a clear and intuitive layout, making it easy for users to navigate settings and options. An accompanying mobile app further enhances usability, providing remote control capabilities and easy access to streaming services.

With its durable build quality and aesthetically pleasing design, the Onkyo 29400468 fits seamlessly into any audio setup. Its compact dimensions allow for easy placement in various environments, whether it's a small apartment or a larger home theater.

Ultimately, the Onkyo 29400468 represents a perfect fusion of sound quality, modern technology, and user-friendly features, making it a premier choice for anyone looking to elevate their audio experience.
Top Page Image Contents