Onkyo 29400468 Controlling Other Onkyo Components, Preprogrammed Remote Control Codes

Page 40

Controlling Other Onkyo Components

You can use the AV receiver’s remote controller (RC-762M) to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc.

Preprogrammed Remote Control Codes

The following REMOTE MODE are preprogrammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.

For details on controlling these components, see the pages indicated.

BD/DVD Onkyo Blu-ray Disc player (➔ 41)

TV/CD Onkyo CD player (➔ 41)

PORT Onkyo Universal Port Option (➔ 38)

Entering Remote Control Codes

You’ll need to enter a code for each component that you want to control.

1 Look up the appropriate remote control code in the Remote Control Codes for Onkyo Compo- nents Connected via u.

2 While holding down REMOTE MODE to which you want to enter a code, press and hold down DISPLAY (about 3 seconds).

Note

•Remote control codes cannot be entered for RECEIVER.

•Apart from RECEIVER, remote control codes from any category can be entered for REMOTE MODE. However, these buttons also work as input selector buttons (➔ 19), so choose a REMOTE MODE that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose TV/CD when entering its remote control code.

3 Within 30 seconds, use the number buttons to enter the 5-digit remote control code.

The remote indicator flashes twice.

If the remote control code is not entered success- fully, the remote indicator will flash once slowly.

Remote Control Codes for Onkyo Components Connected via u

Onkyo components that are connected via uare con- trolled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.

1 Make sure the Onkyo component is connected with an ucable and an analog audio cable (RCA).

See “Connecting Onkyo uComponents” for details (➔ 16).

2 Enter the appropriate remote control code for

REMOTE MODE.

•BD/DVD

`31612:

Onkyo DVD player with u

•TV/CD

`71327:

Onkyo CD player with u

`42157:

Onkyo cassette tape deck with u

•PORT

`81993: Onkyo Dock

See the previous section for how to enter remote control codes.

Note

•When using a cassette tape deck connected via u, press and hold TV/CD to switch to TAPE.

3 Press REMOTE MODE, point the remote control- ler at the AV receiver, and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component that’s not connected via u, use the following remote control codes:

•BD/DVD

`30627:

Onkyo DVD player without u

•TV/CD

`71817:

Onkyo CD player without u

`11807: Onkyo TV

En

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents HT-RC230 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Using the Remote ControllerInstalling the Batteries Aiming the Remote ControllerContents Features AmplifierProcessing MiscellaneousFront & Rear Panels Front PanelUREMOTE Control jack DisplayRear Panel Front Speakers B terminalsRemote Controller Controlling the AV ReceiverSpeakers a and B About Home TheaterEnjoying Home Theater Connecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting a Powered Subwoofer Connecting the Speaker CablesSpeakers a About AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableJack Signal Components Connecting Components with HdmiAudio return channel ARC function Using the AUX Input jack on the front panel Connecting External ComponentsHow to record the video Connecting Onkyo uComponents Connecting AntennaSystem On/Auto Power On Remote ControlOn-screen setup menus are displayed when Depends on the Audio TV OUT settingWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off Using the Music Optimizer Setting the Display BrightnessDisplaying Source Information Press Music Optimizer on the front panelUsing the Sleep Timer Using HeadphonesMuting the AV Receiver Changing the Input DisplayUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioSelecting Presets Presetting FM/AM StationsDeleting Presets Connecting a Recording Component RecordingAV Recording Recording Separate AV SourcesMOVIE/TV button Music buttonGame button Stereo buttonListening Modes Speaker LayoutOnkyo-Original DSP Listening Modes Listening modes cannot be selected with some source formatsOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Hdmi Input Component Component Video InputDigital Audio Digital Audio Input Explanatory NotesSp Config Speaker Configuration Sp Distance Speaker DistanceAudio Adjust Multiplex/Mono SettingsDolby Settings Level Cal Level CalibrationName Edit Hdmi SetupHardware Power Control LipSyncHdmi Control Rihd Audio Return Ch ARCUsing the Audio Settings Tone Control SettingsSpeaker Levels Late Night FunctionMusic Optimizer CinemaFILTERAudio Selector SyncAdjusting the Bass & Treble Digital Input Signal FormatsBass Treble Connecting an Onkyo Dock Controlling iPodModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Without the RI Control Controlling Your iPodWith the RI Control Available buttons 3, 2, 5Repeat Display *6 Muting Album + VOL q / w Menu ReturnPreprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsNumber 1 to Number +10 Cassettetape deckDisc + Troubleshooting Standby indicator flashes redCan’t turn on the AV receiver There’s no sound, or it’s very quietThere’s no sound with a certain signal format Volume cannot be set toAbout DTS signals Only the front speakers produce soundRemote controller doesn’t work Stand-by power consumptionSound changes when I connect my headphones There’s no picture from a source connected to an HdmiVideo ATT0 default Video AttenuationSpecifications Amplifier SectionVideo Section Tuner SectionSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerMemo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

29400468 specifications

Onkyo has long been synonymous with high-quality audio, and the Onkyo 29400468 model exemplifies this commitment to excellence. This advanced audio device is designed to deliver an immersive listening experience, making it a noteworthy choice for audiophiles and casual listeners alike.

One of the standout features of the Onkyo 29400468 is its high-fidelity sound reproduction. It employs a sophisticated amplifier design that allows for a wide dynamic range and crisp clarity. Users can expect a robust bass response balanced with smooth mids and highs, ensuring that every note is delivered with precision. The unit supports modern audio formats, enhancing its versatility across various media types.

In terms of connectivity, the Onkyo 29400468 offers a comprehensive array of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The inclusion of digital audio inputs ensures compatibility with a wide range of sources, enhancing convenience and accessibility. Bluetooth technology is also integrated, enabling seamless wireless streaming from smartphones and tablets.

The Onkyo 29400468 is equipped with advanced processing technologies, including DTS:X and Dolby Atmos, which create a multi-dimensional soundstage. These formats enable users to experience audio as intended by the content creators, providing a cinema-like experience in the comfort of their own home. Additionally, the device features built-in EQ settings, allowing users to tailor the sound profile to their personal preferences.

Another impressive characteristic of the Onkyo 29400468 is its user-friendly interface. The device is designed with a clear and intuitive layout, making it easy for users to navigate settings and options. An accompanying mobile app further enhances usability, providing remote control capabilities and easy access to streaming services.

With its durable build quality and aesthetically pleasing design, the Onkyo 29400468 fits seamlessly into any audio setup. Its compact dimensions allow for easy placement in various environments, whether it's a small apartment or a larger home theater.

Ultimately, the Onkyo 29400468 represents a perfect fusion of sound quality, modern technology, and user-friendly features, making it a premier choice for anyone looking to elevate their audio experience.
Top Page Image Contents