Mitsubishi Electronics NSB1107STTUW manual Available, Items Function

4.2Adjustment Items

	X:			Available
Items	Function	A	B		C	D
CONTRAST	Adjusts the contrast level.		X		X	X
BRIGHT	Adjusts the black level of the screen		X		X	X
COLOR NO	Select the desired color from Color 1, Color 2, and Color 3 presets.				X
R-GAIN	Adjusts the red-color balances for the selected color.		X		X	X
G-GAIN	Adjusts the green-color balances for the selected color.		X		X	X
B-GAIN	Adjusts the blue-color balances for the selected color.		X		X	X
COLOR TEMPERATURE	Adjusts the color temperature of the image on the screen.		X		X	X
COLOR RESET	Restores the each color gain and color temperature to the factory preset.	-	-		-	-
HORIZ-SIZE	Adjusts the horizontal size of the image on the screen.	X	X		X
HORIZ-PHASE	Adjusts the horizontal position of the image on the screen.	X	X		X
HORIZ-POSITION	Adjusts the horizontal position of the screen raster.	X	X		X
VERT-SIZE	Adjusts the vertical size of the image on the screen.	X	X		X
VERT-POSITION	Adjusts the vertical position of the image on the screen.	X	X		X
PINCUSHION	Straightens the left and right sides of the image on the screen.	X	X		X
KEYSTONE	Adjusts the parallelism of the left and right sides of the image on the screen.	X	X		X
TOP-PIN	Adjusts the pincushioning at the top corners of the screen.	X	X		X
BOTTOM-PIN	Adjusts the pincushioning at the bottom corners of the screen.	X	X		X
PIN-BALANCE	Adjusts the curvature of the left and right sides of the image on the screen.	X	X		X
KEY-BALANCE	Adjusts the vertical slant or tilt of the screen image.	X	X		X
ROTATION	Adjusts the rotation of the image on the screen.		X		X	X
ZOOM	Zooms the screen to all sides.	X	X		X
GEOMETRY RESET	Restores to the factory preset level.(See "NOTE" below.)	-	-		-	-
TEXT MODE	To get a preferable image for your work.				X
BLACK LEVEL	Select the black level of the screen.				X
HORIZ-CONVERGENCE	Adjusts the horizontal alignment of the red, green and blue beams.		X		X	X
VERT-CONVERGENCE	Adjusts the vertical alignment of the red, green and blue beams.		X		X	X
VERT-CONV-TOP	Adjusts the upper vertical alignment of the red, green, and blue beams.		X		X	X
VERT-CONV-BOTTOM	Adjusts the bottom vertical alignment of the red, green, and blue beams.		X		X	X
HORIZ-CONV-RIGHT	Adjusts the horizontal alignment of the red, green and blue beams on the right part of screen.		X		X	X
HORIZ-CONV-LEFT	Adjusts the horizontal alignment of the red, green and blue beams on the left part of screen.		X		X	X
CORNER PURITY (TL)	Adjusts the purity of the top-left corners of the screen.		X		X	X
CORNER PURITY (TR)	Adjusts the purity of the top-right corners of the screen.		X		X	X
CORNER PURITY (BL)	Adjusts the purity of the bottom-left corners of the screen.		X		X	X
CORNER PURITY (BR)	Adjusts the purity of the bottom-right corners of the screen.		X		X	X
MOIRE CANCEL	When setting to ON, the moire level on the screen can decreased by the MOIRE				X
	CANCEL LEVEL.
MOIRE CANCEL LEVEL	Adjusts the moire level on the screen.		X		X
CLAMP PULSE POSITION	Uses this function to eliminate excessive green or white background that may occur				X
	when both Sync-On-Green and external sync signals are applied to the monitor.
DEGAUSS	Eliminates possible color shading or impurity.	-	-		-	-
POWER SAVE	When setting to ON, the power consumption of the monitor will be reduced when not in use				X	X
	if your computer is set for power management.
CONTROL LOCK	Locks the OSD function except for "BRIGHT" and "CONTRAST".					X
OSD POSITION	Moves the OSD screen position.				X	X
ALL RESET	Restores all items to the factory preset level.(See "NOTE" below.)	-	-		-	-
GTF AUTO ADJUST	Adjusts the screen size and distortion automatically.	-	-		-	-
DIAGNOSIS	Indicates the current scanning frequency, factory or user preset timing number, and	-	-		-	-
	signal input connector.
LANGUAGE	Selects the language used on OSD screen.					X
USB UP-STREAM	Selects the Upstream port which you want to use.				X	X
USB PORT COMBINATION	Selects the combination of the Upstream port and signal input connector.				X	X

A.Press "GEOMETRY RESET" to restore to the factory preset level.

B.Press and buttons together, to restore to the factory preset level.

C.Press "ALL RESET" to restore to the factory preset level.

D.Set data does not change by the change of the signal timing.

If a non-Factory Preset timing is used, "GEOMETRY RESET" and "ALL RESET" do not work.

ENGLISH

- 15 -