Mitsubishi Electronics NSB1107STTUW manual Usb Up-Stream, USB Port, Combination

Group	Item	Item	Press the Minus Button	Press the Plus Button
Icon	Icon
			The USB functions of the com-	The USB functions of the com-
			puter connected to Upstream port	puter connected to Upstream port
			ROOT-A become active.	ROOT-B become active.

N O T E

�The active Upstream port in active is colored blue on the OSD screen.

�In case that either the Upstream port ROOT-A or ROOT-B is chosen by this function, the auto-change of the Upstream port is not

		available.
USB UP-STREAM		� It may take about 15 seconds until the USB devices have been
		recognized by the computer after the Upstream port is changed.
		� Make sure the operation of the devices connected to the down-
		stream ports before changing USB Upstream ports. It may take
		approximately 15 seconds max. until the devices have been
		recognized by the computer and start to operate after the Up-
		stream ports are changed.
		� Do not change the Upstream ports during recognition to prevent
		errors of the operation of devices or application software.
		� Close all Windows programs before changing Upstream ports.
	The Upstream port ROOT-A is		The Upstream port ROOT-A is
	assigned for signal input connec-		assigned for signal input con-
	tor "D-SUB" and ROOT-B is as-		nector "BNC" and ROOT-B is
	signed for "BNC"		assigned for "D-SUB".
		N O T E
	� This function is to change the Upstream port automatically in
USB PORT		corresponding to the change of signal input connector.
	� This function is only available in case that both the Upstream ports
COMBINATION		are connected to the computers.
	� It may takes 15 seconds until the USB devices have been recog-
		nized by the computer after the Upstream port is changed.
	� In case that the computer chosen enters into a power management
		mode, the signal input connector and Upstream port are changed to
		others automatically.
	� When the Upstream port which is connected to the computer not
		displays on the screen is selected, the operation of the USB devices
		connected to the Downstream ports is not shown on the screen of the
		display monitor.

N O T E

USB Monitor Control will be available when installing "USB Monitor Control Software" into the computer. The "USB Monitor Control Software" can be downloaded from Mitsubishi Internet Home Page:

http://www.mitsubishi-display.com/

- 18 -