Mitsubishi Electronics NSB1107STTUW manual Part Name, Control Names, Function

2 PART NAME

2.1Control Names

See Figures 3 and 4 for the location of the user controls,

indicator and connectors.

Each part is identified by number and is described

individually.

FRONT REAR

			D-SUB
				BNC	COMP.
A	B	R	G	B	HD	VD
		1
		2

ENGLISH

			D-SUB
				BNC	COMP.
A	B	R	G	B	HD	VD
		1
		2

Figure 3 Figure 4

2.2Function

1.POWER SWITCH: A push-on / push-off switch for AC power.

2.POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates amber when the monitor is in the power management modes.

3.INPUT CONNECTOR SELECT/OSD OFF BUTTON:

•Without OSD screen, push to select the signal input connector, BNC or D-SUB.

•With OSD screen, push to turn the OSD screen off.

If only one input is used, the monitor will select it automati- cally.

4.DOWN BUTTON: Push to select group icon.

5.ITEM SELECT BUTTON: Push to select the item icon.

6.FUNCTION ADJUST BUTTONS: Push the adjust buttons to adjust the image on the screen.

7.USB DOWNSTREAM PORT: To connect to USB equipped peripherals, e.g, USB camera, keyboard, printer, etc.

- 9 -

8.AC POWER CONNECTOR

9.SIGNAL INPUT CONNECTOR (DB9-15P)

10.SIGNAL INPUT CONNECTORS (BNC)

11.USB UPSTREAM PORTS: To connect to USB equipped computer(s).

12.USB DOWNSTREAM PORTS: To connect to USB equipped peripherals, e.g, USB camera, keyboard, printer, etc.