Mitsubishi Electronics MT819, LDT521V Controlling the Monitor with a PC LAN „ To set from a PC

Page 22

Controlling the Monitor with a PC (LAN)

„To set from a PC

When the monitor is connected to a PC, LAN settings can be configured via PC.

Set up process

(1)Connect your monitor to a PC

(2)Specify the PC’s IP address

(3)Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this monitor.

LAN terminal

PC

To LAN terminal

LAN cable (commercially available, crossover)

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily change the settings on the PC.

This explanation is based on Windows XP.

1.Log on to the PC with an administrator account.

2.Click [Start], and then click “Control Panel”.

3.Click “Network and Internet Connections”, and then click “Network Connections”.

If you are using the classic display style, double-click on “Network Connections”.

4.Right click on “Local Area Connection” and from the menu, click “Properties”.

5.Click “Internet Protocol (TCP/IP)”, and then click “Properties”.

6.Make a note of the current IP address, subnet mask, and default gateway settings.

Make sure you write this information now as you will be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards.

7.Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set as follows.

•IP Address: 192.168.150.3

•Subnet Mask: 255.255.255.0

•Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below.

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 0.0.0.0

(3)Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1.Turn the power ON to the monitor.

2.Set RS-232C/LAN SELECT on the SETUP menu to LAN.

PC operation

3.Launch Internet Explorer, in the “Address” box type “http://192.168.150.2/” and press the Enter key.

You will be prompted to enter a user name and password.

4.Leave the user name and password boxes blank and click [OK].

E22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operation Guide Contents Menu Basic OperationMute DisplayDot by Dot Basic Operation „Switching the screen sizeWide Zoom Normal Cut off„Example of operation Menu ItemsDisplaying the menu screen „Menu screen display„SCREEN „SETUPMenu item details „PICTURE„OPTION „PIP/PbyP „ENLARGE PC input„Dual screen display „SCHEDULE Power„Enlarge ENLARGE-POS„Screen display for adjustment Adjustments for PC screen display„Automatic adjustment „ADVANCED items AV input See11 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions„Response code format 13 E„ID numbers Wait ← 15 E „Repeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C „Repeater controlHow to read the command table RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu 17 EAudio menu Controlling the Monitor with a PC RS-232C Setup menu Option menu19 E Image Position Epos settingHorizontal orientation Vertical orientation Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuOthers 21 E Settings to connect to a LANControlling the Monitor with a PC LAN „ To set on the monitorDefault Gateway 0.0 This monitor is factory preset as shown below IP AddressControlling the Monitor with a PC LAN „ To set from a PC Controlling the Monitor with a PC LAN 23 EControlling with a PC „ Basic operation„ Information Standby mode, Power on is the operation available„ Control 25 E „ Network LAN Setup„ Network Security „ Network General „ Mail Originator„ Mail Recipient 27 E„ Mail Periodical URL Information „ Service & Support URL InformationSpecify the condition to display the URL M O 29 EMitsubishi Contact Information North America
Top Page Image Contents