Mitsubishi Electronics MT819, LDT521V manual „ Network General, „ Mail Originator

Page 26

Controlling the Monitor with a PC (LAN)

„NETWORK (GENERAL)

This screen allows you to specify the general LAN settings.

MONITOR NAME

Specify a name for this monitor as it should appear on the Internet Explorer screen.

AUTO LOGOUT TIME

Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.

Specify in minutes from 1 to 65535. A value of ‘0’ will disable this function.

DATA PORT

Specify the TCP port number to use for exchanging data with the monitor.

Specify a value from 1025 to 65535.

SEARCH PORT

Specify the port number to use when searching for this monitor.

Specify a value from 1025 to 65535.

TIPS

•The MONITOR NAME can be up to 16 alphanumeric characters or symbols.

„MAIL (ORIGINATOR)

This screen allows you to configure the e-mail sent periodically or when the monitor has an error.

The settings depend on the configuration of your LAN. Ask your LAN administrator for details.

SMTP SERVER

Specify the SMTP server address for sending e-mail.

*When using a domain name, make sure to specify the DNS server as well. (See page 25.)

ORIGINATOR E-MAIL ADDRESS

Specify the e-mail address for this monitor.

This address becomes the e-mail address of the originator.

ORIGINATOR NAME

Specify the name for the originator.

This name appears in the “Originator Name” field of the e-mail.

AUTHENTICATION

Specify the authentication method to use when sending e-mail.

POP SERVER

If the “AUTHENTICATION” method is “POP before SMTP”, specify the POP server address.

ACCOUNT NAME / PASSWORD

If the “AUTHENTICATION” method is “POP before SMTP”, specify the account name and password to connect to the POP server.

TIPS

•You can enter up to 64 alphanumeric characters or symbols for the ORIGINATOR E-MAIL ADDRESS, ORIGINATOR NAME, ACCOUNT NAME, and PASSWORD.

•The SMTP SERVER and POP SERVER can be up to 64 characters.

The following characters can be used: a-z, A-Z, 0-9, - , .

E26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operation Guide Contents Menu Basic OperationMute DisplayDot by Dot Basic Operation „Switching the screen sizeWide Zoom Normal Cut off„Example of operation Menu ItemsDisplaying the menu screen „Menu screen display„SCREEN „SETUPMenu item details „PICTURE„OPTION „Dual screen display „ENLARGE PC input„PIP/PbyP „SCHEDULE Power„Enlarge ENLARGE-POS„Screen display for adjustment Adjustments for PC screen display„Automatic adjustment „ADVANCED items AV input See11 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions„ID numbers 13 E„Response code format Wait ← 15 E „Repeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C „Repeater controlHow to read the command table RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CAudio menu 17 EControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Setup menu Option menuHorizontal orientation Vertical orientation Image Position Epos setting19 E Others Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu 21 E Settings to connect to a LANControlling the Monitor with a PC LAN „ To set on the monitorControlling the Monitor with a PC LAN „ To set from a PC This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 Controlling the Monitor with a PC LAN 23 EControlling with a PC „ Basic operation„ Control Standby mode, Power on is the operation available„ Information „ Network Security „ Network LAN Setup25 E „ Network General „ Mail Originator„ Mail Periodical 27 E„ Mail Recipient Specify the condition to display the URL „ Service & Support URL InformationURL Information M O 29 EMitsubishi Contact Information North America
Top Page Image Contents