Mitsubishi Electronics LDT521V, MT819 manual 27 E, Mail Recipient, Mail Periodical

Page 27

MAIL (RECIPIENT)

This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES

Specify the e-mail addresses to send error notiﬁcation e-mail to.

CONDITION

Specify the conditions to send mails.

When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting.

CONFIRMATION

Sends test e-mail.

This allows you to conﬁrm that the e-mail settings are conﬁgured properly.

Attach the log ﬁle to a TEMPERATURE/HARDWARE error e-mail

When this option is checked, a log is added to the mail which notiﬁes a temperature or status error.

TIPS

•The RECIPIENT E-MAIL ADDRESSES can be up to 64 alphanumeric characters or symbols.

Controlling the Monitor with a PC (LAN)

MAIL (PERIODICAL)

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.

DAY OF THE WEEK

Specify the day of the week to send the periodical mails.

TIME

Specify the time of the day to send the periodical mails.

Caution

•Do not turn off the main power when you set to send the periodical mails.

•Specify the correct date and time. (See page 7.)

If the date and time settings are incorrect, the periodical mail is not sent properly.

•Regularly conﬁrm that the speciﬁed date and time is correct.

27 E

Image 27

Contents Operation Guide Contents Display Basic OperationMute MenuCut off Basic Operation „Switching the screen sizeWide Zoom Normal Dot by Dot„Menu screen display Menu ItemsDisplaying the menu screen „Example of operation„PICTURE „SETUPMenu item details „SCREEN„OPTION „ENLARGE PC input „PIP/PbyP„Dual screen display ENLARGE-POS Power„Enlarge „SCHEDULE„ADVANCED items AV input See Adjustments for PC screen display„Automatic adjustment „Screen display for adjustment11 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connection13 E „Response code format„ID numbers Wait ← Controlling the Monitor with a PC RS-232C „Repeater control „Repeater control commandVolume settings for all monitors are returned 15 EControlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection How to read the command table17 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Option menu Controlling the Monitor with a PC RS-232C Setup menuImage Position Epos setting 19 EHorizontal orientation Vertical orientation Initialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuOthers „ To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 21 EThis monitor is factory preset as shown below IP Address Default Gateway 0.0Controlling the Monitor with a PC LAN „ To set from a PC „ Basic operation 23 EControlling with a PC Controlling the Monitor with a PC LANStandby mode, Power on is the operation available „ Information„ Control „ Network LAN Setup 25 E„ Network Security „ Mail Originator „ Network General27 E „ Mail Recipient„ Mail Periodical „ Service & Support URL Information URL InformationSpecify the condition to display the URL 29 E M ONorth America Mitsubishi Contact Information