Mitsubishi Electronics LCD1760VM Position Controls Analog input only, Colour Control Systems

Page 10
Position Controls (Analog input only)

Position Controls (Analog input only)

LEFT/RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN/UP

Controls Vertical Image Position within the display area of the LCD.

H. SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

Should the “AUTO Adjust function” do not give you a satisfactory picture setting, a further tuning can be performed using the “H.Size” function (dot clock). For this a Moiré test pattern could be used. This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen. If the H.Size is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous.

English

When H.SIZE value is

When H.SIZE value is

When H.SIZE value is

wrong.

improved.

correct.

FINE

Improves focus, clarity and image stability by increasing or decreasing this setting.

Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability by increasing or decreasing this setting.

For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous.

When FINE value is

When FINE value is

wrong.

correct.

Colour Control Systems

Six colour presets select the desired colour setting (sRGB and NATIVE colour presets are standard and cannot be changed).

R, G, B

Increases or decreases Red, Green or Blue colour depending upon which is selected. The change in colour will appear on screen and the direction (increase or decrease) will be shown by the bars.

sRGB

sRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGB colour space. With this colour supported environment, the operator could easily and confidently communicate colours without further colour management overhead in the most common situations.

NATIVE

Original colour presented by the LCD panel that is unadjustable.

English-9

Image 10
Contents MultiSync LCD1760VM User’s ManualEnglish DeclarationDeclaration of the Manufacturer Canadian Department of Communications Compliance Statement For the Customer to use in U.S.A. or CanadaDeclaration of Conformity FCC InformationQuick Start ContentsEnglish-3 Figure B.2 Figure A.1Figure B.1 Figure D.1Remove Monitor Stand for Mounting Raise and Lower Monitor ScreenTilt and Swivel Figure F.1Figure R.1 Figure R.2 Figure R.3 English-6Figure R.4 English-7OSM On-Screen-Manager Controls Auto Adjust Analog input onlyControls SoundLEFT/RIGHT Position Controls Analog input onlyColour Control Systems DOWN/UPInformation ToolsOSM Warning Safety Precautions and Maintenance Recommended useEnglish-11 Ergonomics English-12MultiSync LCD1760VM Monitor SpecificationsMonitor Specifications English-13Features English-14Troubleshooting What does labelling involve? TCO’99Why do we have environmentally labelled computers? Environmental Requirements Flame retardants